Design and Manufacturing

20 years (Teaching, research and administration)

Graduate Level	:	Mechanics of Solid/Material, Introduction to Composite Materials, Basic Manufacturing Process, Maintenance Engineering and Management, Advanced Manufacturing Process, Statical Methods and Design of Experiment, Automation and NC Machine, Computer Integrated Manufacturing, Robotics and Flexible Manufacturing System
Post Graduate Level	:	Analysis and Performance of Composite Materials, Metrology, Quality Control and Reliability, Manufacturing System Models, Diagnostic Techniques, Advanced Maintenance Engineering

Laminated composite structures/Curved structures; Nonlinear FEM; Smart (SMA, PZT, FGM, FG-CNT and Magnetostrictive material) Structures; Vibro-acoustic Analysis of Laminated/Smart Structures, Natural fiber composites, Machining and optimization

Ph. D. Candidates	:	02 Awarded, 02 submitted, 04 Continuing
M. Tech. Candidates	:	19 Nos. (Completed)

1. Top-Cited (top 2%) scientists by Stanford University and Elsevier (2022 and 2023)
2. World Scientist and University Rankings 2024 (All India Rank: 3836)
3. “INSTITUTION AWARD”, at 63rd Annual Technical Session of the Institute of Engineers (IE), Odisha state centre on 23rd March 2024.
4. “Best Presenter”, 5th International Conference on Processing and Characterization (ICPCM 2023), NIT Rourkela
5. “International Distinguished Researcher Award 2023” at Global Edu-Conclave 2023, International Institute of Organized Research (I2OR)
6. “Kalpa Acharya Award” recognizing Exemplary Contributors of Research & Education Sector, held at Andhra University, Visakhapatnam, 2021-22
7. “Best Paper Award”, 50th National Symposium on Acoustics (NSA-2023)
8. “International Young Scientist Award 2020-21” International Institute of organized Research (I2OR), 24th January 2022.
9. “Er Brundaban Sahu Memorial Award” at 62nd Annual Technical Session of Odisha State Centre, The Institution of Engineers (India) on 28th March, 2021.
10. “Er. Pratap Chandra Panda Memorial Award”, at 62nd Annual Technical Session of Odisha State Centre, The Institution of Engineers (India) on 28th March, 2021
11. “Er Brundaban Sahu Memorial Award” at 60th Annual Technical Session of Odisha State Centre, The Institution of Engineers (India) on 30th March, 2019.
12. “Er Raj Kishore Mahapatra Award” at 59th Annual Technical Session of Odisha State Centre, The Institution of Engineers (India) on 21st January, 2018
13. "Er Avaya Chandra Nayak Memorial Award" at 58th Annual Technical Session of Odisha State Centre, The Institution of Engineers (India) on on 19th February 2017.
14. “Best Presenter” by Hong Kong Society of Mechanical Engineers at ATMME 2017.
15. “COSMIC-Young Scientist Award” by COSMIC Journal group at AETM-2017, Bangkok, Thailand on 6th January 2017.
16. “IEI Young Engineers Award 2016-2017”, at 32nd National Convention of Mechanical Engineers, Institute of Engineers (IE) India, held at Ranchi on December 10, 2016.
17. “INSTITUTION AWARD”, at 57th Annual Technical Session of the Institute of Engineers (IE), Odisha state centre on 14th February 2016.
18. “Best Paper presenter”, at AETM, Bangkok, Thailand, 23rd July 2015.

All India Council For Technical Skill Development (AICTSD) 55599; The Institute of Engineers (India) M-147628-3; Indian Science Congress Association (ASCA) L29397; Indian Society for Technical Education (ISTE) LM-52036; International Association of Engineers (IAENG) 168376; South Asia Institute of Science and Engineering (SAISE) 20160407001; Universal Association of Mechanical and Aeronautical Engineers (UAMAE) AM10100057127; The American Institute of Aeronautics and Astronautics (AIAA) 737906; International Association of Advanced Materials (IAAM) 816231911794; The International Academy of Science and Engineering for Development (IASED) 51050247; Institute for Engineering Research and Publication (IFERP) PMIN93618702;

1. Name of the research project : Numerical and Experimental Investigation on Nonlinear Vibroacoustic Response of Laminated Composite and Functionally Graded Material Shell Panel under Hygrothermal EnvironmentAmount(Rupees in Lakhs) : 32.67Date of Sanction : 18/12/2019Sponsoring agency : SERB, DST, Govt. of IndiaStatus : Completed (Production Engineering)
2. Name of the research project : DST-NIMAT Project 2018-19Amount(Rupees in Lakhs) : 0.8Date of Sanction : 04/072018Sponsoring agency : EDII, DST, Govt. of IndiaStatus : Completed (Production Engineering)
3. Name of the research project : Optimal design of Ceramic and Nanoparticle filled composite structure using hybrid (FEM and soft computing) techniqueAmount(Rupees in Lakhs) : 0.55Date of Sanction : 16/01/2020Sponsoring agency : TEQIP-III, VSSUT, Burla“Collaborative Research and Innovation scheme” Status : Completed (Production Engineering)
4. Name of the research project : Development, Characterization andMechanical Response Analysis of Nano Fibrillated Cellulose (NFC) Filled Hybrid Nano-composites Amount(Rupees in Lakhs) : 0.50Date of Sanction : 18/03/2021Sponsoring agency : TEQIP-III, VSSUT, Burla“Collaborative Research and Innovation scheme” Status : Completed (Production Engineering)

International Publications

2024
1. L. Mishra, T. R. Mahapatra, D. Mishra, S. R. Parimanik, (2024) Investigation of laser micro-drilling machinability and performance optimization of polymer nanocomposites reinforced with different carbon allotropes. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Vol. 238, No. 3. 1354-1371, doi:10.1177/09544089231158898. (IF: 2.4, SCI)
2. B Dash, TR Mahapatra, P Mishra, D Mishra (2024) Hygrothermal sound radiation analysis of layered composite plate using HFEM-IBEM micromechanical model and experimental validation, Structural Engineering and Mechanics, Vol. 89, No. 3, 265-281, https://doi.org/10.12989/sem.2024.89.3.265, (IF: 2.2, SCIE, SCOPUS)
3. D K Sahu, P. P. Tripathy, T. R. Mahapatra, P. Mishra, and D. Mishra (2024) Design optimization of structural component (hitch bracket of tractor): A reverse engineering approach, Structural Engineering and Mechanics, 89(5), 467-477, https://doi.org/10.12989/sem.2024.89.5.467, (IF: 2.2, SCIE, SCOPUS)
4. I Rout, TR Mahapatra, P Mishra, D Mishra (2024) Free Vibration and Acoustic Responses of Partially Biodegradable Hybrid Composites: Numerical Analysis and Experimental Validation, Journal of Vibration Engineering and Technologies, https://doi.org/10.1007/s42417-023-01254-3, (IF: 2.7, SCIE, SCOPUS)
5. L Mishra, TR Mahapatra, D Mishra, AK Rout (2024) Laser micro-drilling of CNT reinforced polymer nanocomposite: A parametric study using RSM and APSO, Advances in Materials Research 13 (1), 1-18, DOI: https://doi.org/10.12989/amr.2024.13.1.001, (IF: 3.8, ESCI, SCOPUS)
6. B. Dash, T. R. Mahapatra, D. Mishra, (2024) Vibroacoustic Characterization of Multi-layered Composite Structure Under Hygrothermal Load Using Higher-Order FEM-IBEM Micromechanical Model. Journal of Vibration Engineering & Technologies, Vol. 12, No. 2, 1725-1751, doi: 10.1007/s42417-023-00939-z. (IF: 2.7, SCIE, SCOPUS)
7. L Mishra, TR Mahapatra, D Mishra, P Mishra, PC Padhi (2024) Study of Nd: YAG laser micro-drilling machinability and parametric optimization of graphite/Epoxy and carbon black/Epoxy nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems. 2024;0(0). doi:10.1177/23977914231217921, (IF: 4.1, ESCI, SCOPUS)
8. J Das, AK Rout, SR Parimanik, I Rout, TR Mahapatra, D Mishra (2024) Dynamic Mechanical and Static Analysis of Kevlar Fiber Reinforced Epoxy Composites Incorporated with Egg Shell Particle, Suranaree Journal of Science and Technology. 31(1):010273(1-10), DOI: https://doi.org/10.55766/sujst-2024-01-e0892. (IF: 0.214, Scopus)
9. L Mishra, TR Mahapatra, D Mishra, SR Parimanik, AK Rout (2024) Parametric optimization of hole quality in Nd: YAG laser drilled carbon black/epoxy composite by grey based whale optimization technique, Materials Today: Proceedings https://doi.org/10.1016/j.matpr.2024.02.022, (IF: 2.59, SCOPUS)
10. SR Parimanik, AK Mahapatra, TR Mahapatra, D Mishra (2024) Parametric analysis of Nd: YAG laser welding of NiTi SMA wires using Taguchi quality loss and grey relational method, Materials Today: Proceedings https://doi.org/10.1016/j.matpr.2024.02.021, (IF: 2.59, SCOPUS)
2023
11. P K Sahu, T R Mahapatra, S Jaypuria, and D Mishra (2023) Optimization of static response of l aminated composite plate using nonlinear FEM and ANOVA Taguchi method, Steel and Composite Structures, 48(6) 625-639, https://doi.org/10.12989/scs.2023.48.6.625, (IF: 4.6, SCIE, SCOPUS)
12. B Dash, TR Mahapatra, D Mishra (2023) Numerical vibroacoustic analysis of multi-layered composite structure under hygrothermal loading using coupled FEM-IBEM micromechanical model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. doi: 10.1177/09544062231205359 (IF: 2.0, SCI)
13. M Das, SR Parimanik, TR Mahapatra, D Mishra, DK Sahu (2023) Characteristics, Machinability Modeling, and Machining Performance Improvement of Graphene Reinforced Al-MMC Using CRSM and Utility Method. Journal of Superhard Materials 45 (4), 266-292. Doi: 10.3103/S1063457623040020 (IF: 0.9, SCIE)
14. I. Rout, T. R. Mahapatra, and D. Mishra, (2023) Synthesis and Characterization of Incense Stick Ash Filled Luffa cylindrica/Hair Fiber Reinforced Partially Biodegradable Composite. Fibers and Polymers 24, 1417–1430. doi: 10.1007/s12221-023-00123-w. (IF: 2.347, SCIE)
15. S. R. Parimanik, T. R. Mahapatra, and D. Mishra, (2023) A Systematic Literature Review on Laser Welding of NiTi SMA, Lasers Manuf. Mater. Process., vol. 10, no.1, pp. 77-117, doi: 10.1007/s40516-022-00200-7. (IF: 1.673, SCOPUS)
16. S. R. Parimanik, T. R. Mahapatra, D. Mishra, A. K. Rout, (2023) Optimisation of performance characteristics in laser welding of Nitinol wires using Taguchi and grey relation analysis, Advances in Materials and Processing Technologies, vol. 9, no. 1, pp. 186-195, doi: 10.1080/2374068X.2022.2088653. (IF: 4.73, SCOPUS)
17. L Mishra, TR Mahapatra, D Mishra, SR Parimanik (2023) Machinability study, machining performance optimisation and sustainability assessment in laser micro-drilling of CNT/epoxy nanocomposite, International Journal of Machining and Machinability of Materials, 25 (2), 111-139, doi: 10.1504/IJMMM.2023.133377. (IF: 0.273, SCOPUS)
18. M. Das, S. R. Parimanik, T. R. Mahapatra, D. Mishra, (2023) Effect of graphene reinforcement on the mechanical characteristics and machining performance of aluminium metal matrix composite, International Journal of Process Management and Benchmarking, vol. 14, no. 4, pp. 478-507, doi: 10.1504/IJPMB.2023.132216. (IF: 0.24, SCOPUS)
19. S. Dash, T. R. Mahapatra, K. Mehar, I. Panigrahi, and D. Mishra, (2023) Finite element analysis of thermoelastic free vibration behaviour of hardcore higher-order doubly curved sandwich shell panel, International Journal of Structural Engineering, vol. 13, no. 1, pp. 80–108, doi: 10.1504/IJSTRUCTE.2023.126792. (IF: 1.309, SCOPUS)
20. B. Dash, T. R. Mahapatra, D. Mishra, A. K. Rout, (2023) Acoustic radiation efficiencies of laminated composite structure under mechanical excitation and hygrothermal loading: Numerical analysis, Materials Today: Proceedings, 91 (1), 25-32 doi: 10.1016/j.matpr.2023.04.269. (IF: 2.59, SCOPUS)
21. S. R. Parimanik, T. R. Mahapatra, D. Mishra and A. K. Rout, (2023) Dissimilar Laser Welding of NiTi Alloy with Ferrous and Non-ferrous Material: Optimization of Process Parameters, E3S Web of Conferences, 391, 01167, DOI: 10.1051/e3sconf/202339101167. (IF: 0.38, SCOPUS)
22. A. Ekka, A. Panda, T. R. Mahapatra, D. Mishra, (2023) Erosion and wear analysis of fly ash filled GFRP composite, Materials Today: Proceedings, doi: 10.1016/j.matpr.2023.01.140. (IF: 2.59, SCOPUS)
23. L. Mishra, T. R. Mahapatra, S. R. Parimanik, S. Dash, D. Mishra, (2023) Parametric Optimization in Nd:YAG Laser Micro-drilling of Carbon Black/Epoxy Composite Utilizing GRA and Response Surface Methodology. Lecture Notes in Mechanical Engineering. 917–927 Springer, Singapore. doi: 10.1007/978-981-99-2921-4_82. (IF: 0.19, SCOPUS)
24. I. Rout, T. R. Mahapatra, A. K. Rout, D. Mishra, A. K. Rout, (2023) Study on Effect of Process Parameters on AJM of Partially Biodegradable Hybrid Composite Using TOPSIS Approach. Lecture Notes in Mechanical Engineering. 341–354, Springer, Singapore. doi: 10.1007/978-981-99-2921-4_32 (IF: 0.19, SCOPUS)
2022
25. D. K. Sahu, J. Dandsena, T. R. Mahapatra, and D. Mishra, (2022) Design and Characterization of Progressive Coil Spring for Suspension Systems, Journal of The Institution of Engineers (India): Series C, vol. 103, no. 4, pp. 705–715, doi: 10.1007/s40032-022-00817-9. (IF: 0.311, SCOPUS)
26. I. Rout, T. R. Mahapatra, and D. Mishra, (2022) Abrasive Jet Machining of Incense Stick Ash Filled Luffa-Human Hair Based Sustainable Bio-composite Using Taguchi Based GRA, Journal of Natural Fibers, vol. 19, no. 16, pp. 15022–15034, doi: 10.1080/15440478.2022.2069631. (IF: 3.507, SCIE)
27. I. Rout, T. R. Mahapatra, S. Sahoo, and D. Mishra, (2022) Dry Sliding Wear Behaviour Of Carbonated Fly Ash Filled Composite, Latin American Applied Research - An international journal, vol. 52 (4), 297-302, doi: 10.52292/j.laar.2022.880. (IF: 0.184, SCIE)
28. L. Mishra, T. R. Mahapatra, and D. Mishra, (2022) Performance Evaluation and Sustainability Assessment in Laser Micro-drilling of Carbon Nanotube-Reinforced Polymer Matrix Composite Using MOORA and Whale Optimization Algorithm, Process Integration and Optimization for Sustainability, vol. 6, no. 3, pp. 603–620, doi: 10.1007/s41660-022-00234-6. (IF: 2.39, SCOPUS)
29. L. Mishra, T. R. Mahapatra, D. Mishra, and S. K. Pattanaik, (2022) Machinability Analysis and Multiple Performance Optimization During Laser Micro-drilling of CNT Reinforced Polymer Nanocomposite, Lasers in Manufacturing and Materials Processing., vol. 9, no. 2, pp. 151–172, Jun. 2022, doi: 10.1007/s40516-022-00171-9. (IF: 1.673, SCOPUS)
30. B. Das, S. R. Parimanik, T. R. Mahapatra, and D. Mishra, (2022) Machinability assessment of NiTinol shape memory alloy in electrochemical machining, International Journal of Machining and Machinability of Materials, vol. 24, no. 3–4, pp. 280–313, doi: 10.1504/IJMMM.2022.125200. (IF: 1.21, SCOPUS)
2021
31. N. Pattanaik, P. Bobade, T. R. Mahapatra, D. Mishra, A. Mehta, P. Bachhav, R. C. Panda, (2021) Comparative Assessment of Contact Analysis using Penalty Method and Lagrange Multiplier Method, Design Engineering, pp. 5779–5793.
32. D. Guru, G. K. Awari, T. R. Mahapatra, D. Mishra, and R. C. Panda, (2021) Finite Element Analysis of Natural Frequencies of Layered Composite Plate in Thermal Environment, Design Engineering, pp. 4597–4609.
33. S. Patro, T. R. Mahapatra, S. Dash, V. K. Murty, (2021) Artificial intelligence techniques for fault assessment in laminated composite structure: a review, E3S Web of Conferences, 309, 01083. doi: 10.1051/e3sconf/202130901083. (IF: 0.38, SCOPUS)
34. S Jaypuria, TR Mahapatra, S Sahoo, O Jaypuria, (2021) Computational intelligence-based prediction of joint penetration in laser fabrication, Materials Today: Proceedings, 46(10), 4854-4858, doi: 10.1016/j.matpr.2020.10.325. (IF: 2.59, SCOPUS)
35. Sahoo, S., Mahapatra, T.R., Jena, H. (2021) Constraints in Journey of Graphene from Laboratory to Life, Lecture Notes in Civil Engineering, 2021, 75, pp. 675-685. doi: 10.1007/978-981-15-4577-1_59. (IF: 0.133, SCOPUS)
2020
36. Sharma, N., Mahapatra, T. R., Panda, S. K. and Katariya, P. V., (2020) Thermo-acoustic analysis of higher-order shear deformable laminated composite sandwich flat panel, Journal of Sandwich Structures & Materials, 22(5), pp. 1357-1385 DOI: 10.1177/1099636218784846 (IF: 3.9). SCI
37. B Dansana, TR Mahapatra, P Sahu, SK Sahu, (2020) Tribological and electrochemical corrosion performance analysis of Hastelloy C276 under different loading conditions, Materials Today: Proceedings, 24, 1434-1441, doi: 10.1016/j.matpr.2020.04.462. (IF: 2.59, SCOPUS)
38. S Agarwal, B Dash, P Saini, N Sharma, TR Mahapatra, SK Panda, (2020) Vibroacoustic analysis of un-baffled layered composite plate under thermal environment, Materials Today: Proceedings, 24(2), 1020-1028, doi: 10.1016/j.matpr.2020.04.415. (IF: 2.59, SCOPUS)
39. S Sahoo, TR Mahapatra, N Priyadarshini, S Mahapatra, S Naik, (2020) Influence of water binder ratio on strength and acid resistance of concrete made up of mineral admixture as supplementary cementitious material, Materials Today: Proceedings, 26(2), 796-803, doi: 10.1016/j.matpr.2020.01.028. (IF: 2.59, SCOPUS)
40. S Jaypuria, TR Mahapatra, S Sahoo, O Jaypuria, (2020) Effect of arc length trim and adaptive pulsed-MIG process parameters on bead profile of stainless steel with synergic power source, Materials Today: Proceedings, 26(2), 787-795, doi: 10.1016/j.matpr.2020.01.027. (IF: 2.59, SCOPUS)
41. Jaypuria, S., Mahapatra, T.R., Tripathy, S., Nakhale, S., Gupta, S.K. (2020) Fuzzy C-means Clustering-Based ANFIS Regression Modeling of Hybrid Laser-TIG Fabrication, Lecture Notes in Mechanical Engineering, 2020, https://doi.org/10.1007/978-981-15-1307-7_70, pp. 617-624 (IF: 0.19, SCOPUS).
2019
42. Sharma, N., Mahapatra, T. R. and Panda, S. K., (2019) Hygrothermal effect on vibroacoustic behaviour of higher-order sandwich panel structure with laminated composite face sheets, Engineering Structures, Vol. 197, pp. 109355, DOI: 10.1016/j.engstruct.2019.109355. (IF: 5.58, SCI)
43. Sharma, N., Mahapatra, T. R. and Panda, S. K., (2019) Vibroacoustic analysis of thermo-elastic laminated composite sandwich curved panel: A higher-order FEM-BEM approach, International Journal of Mechanics and Materials in Design Vol. 15(2), pp. 271-289, DOI: 10.1007/s10999-018-9426-5, (IF: 3.561, SCI)
44. Mehar, K., Panda, S. K., Mahapatra, T. R., (2019), Large-deformation bending responses of nanotube-reinforced polymer composite panel structure- numerical and experimental analysis, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 233 (5), pp. 1695-1704, DOI: 10.1177/0954410018761192, (IF: 0.809) SCI
45. Sahoo, S. S., Panda, S. K., Mahapatra, T. R., and Hirwani, C. K., (2019), Numerical analysis of transient responses of delaminated layered structure using different mid-plane theories and experimental validation, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Vol. 43 (1), pp. 41-56, DOI: 10.1007/s40997-017-0111-3 (IF: 0.595) SCI
46. Singh, V. K., Hirwani, C. K., Panda, S. K., Mahapatra, T. R. and Mehar, K., (2019) Numerical and Experimental Nonlinear Dynamic Response Reduction of Smart Composite Curved Structure using Collocation and Non-collocation Configuration, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 233 (5), pp. 1601-1619, DOI: 10.1177/0954406218774362, (IF: 1.015) SCI
47. Dash, S., Mehar, K., Sharma, N., Mahapatra, T. R., Panda, S. K. (2019) Finite element solution of stress and flexural strength of functionally graded doubly curved sandwich shell panel, Earthquake and Structures, Vol. 16 (1), pp. 55-67, DOI: 10.12989/eas.2019.16.1.055, SCIE (IF: 1.309)
48. S Jaypuria, TR Mahapatra, O Jaypuria, (2019) Metaheuristic tuned ANFIS model for input-output modeling of friction stir welding, Materials Today: Proceedings, 18(7), 3922-3930. doi: 10.1016/j.matpr.2019.07.332. (IF: 2.59, SCOPUS)
49. M Das, D Mishra, TR Mahapatra, (2019) Machinability of Metal Matrix Composites: A Review, Materials Today: Proceedings, 18(7), 5373-5381. doi: 10.1016/j.matpr.2019.07.564. (IF: 2.59, SCOPUS)
50. S Jaypuria, S Khandai, TR Mahapatra, A Singh, (2019) Development of activated flux for deep penetration in GTAW, Materials Today: Proceedings, 18(7), 4703-4710. doi: 10.1016/j.matpr.2019.07.456. (IF: 2.59, SCOPUS)
51. B Dash, M Das, M Das, TR Mahapatra, D Mishra, (2019) A concise review on machinability of NiTi shape memory alloys, Materials Today: Proceedings, 18(7), 5141-5150. doi: 10.1016/j.matpr.2019.07.511. (IF: 2.59, SCOPUS)
52. Ranjan, S., Khan, R., Dash, S., Mahapatra, T.R., Panda, S.K. (2019) Thermo-elastic free vibration analysis of functionally graded flat panel with temperature gradient along thickness, IOP Conference Series: Materials Science and Engineering, 2019, 577(1), 012123 (IF: 0.39) (SCOPUS)
2018
53. Sharma, N., Mahapatra, T. R., Panda, S. K. (2018), Numerical analysis of acoustic radiation properties of laminated composite flat panel in thermal environment: A higher-order finite-boundary element approach. IMechE Part C: Journal of Mechanical Engineering Science, Vol. 232 (18), pp. 3235-3249, DOI: 10.1177/0954406217735866 (IF: 1.015) SCI
54. Dash, S., Mehar, K., Sharma, N., Mahapatra, T. R., Panda, S. K. (2018) Modal analysis of FG sandwich doubly curved shell structure, Structural Engineering and Mechanics, Vol. 68 (6), pp. 721-733, DOI: 10.12989/sem.2018.68.6.721, (IF: 2.91) SCI
55. Mehar, K., Mahapatra, T. R., Panda, S. K., Katariya, P. V., and Tompe, U. K (2018) Finite-Element Solution to Nonlocal Elasticity and Scale Effect on Frequency Behavior of Shear Deformable Nanoplate Structure, Journal of Engineering Mechanics, ASCE, Vol. 144(9), pp. 04018094, DOI: 10.1061/(ASCE)EM.1943-7889.0001519 (IF: 1.80) SCI
56. Sharma, N., Mahapatra, T. R. and Panda, S. K., (2018) Numerical analysis of acoustic radiation responses of shear deformable laminated composite shell panel in hygrothermal environment, Journal of Sound and Vibration, Vol. 431, pp. 346-366, DOI: 10.1016/j.jsv.2018.06.007, (IF: 3.20) SCI.
57. Sharma, N., Mahapatra, T. R., Panda, S. K., Hirwani, C. K. (2018), Acoustic radiation and frequency response of higher-order shear deformable multilayered composite doubly curved shell panel – An experimental validation, Applied Acoustics, Vol. 133, pp. 38-51, DOI: 10.1016/j.apacoust.2017.12.013, (IF: 1.921). SCIE
58. Mehar, K., Panda, S. K., Mahapatra, T. R., (2018), Nonlinear Frequency Responses Of Functionally Graded Carbon Nanotube-Reinforced Sandwich Curved Panel Under Uniform Temperature Field, International Journal of Applied Mechanics, Vol. 10 (3), pp. 1850028, DOI: 10.1142/S175882511850028X (IF: 1.954). SCIE
59. Hirwani, C. K., Panda, S. K. and Mahapatra, T. R. (2018), Nonlinear Finite Element Analysis of Transient Behavior of Delaminated Composite Plate, Journal of Vibration and Acoustics, Transactions of the ASME, Vol. 140 (2), pp. 021001, DOI: 10.1115/1.4037848, (IF: 1.692) SCIE.
60. Sharma, N., Mahapatra, T. R., Panda, S. K., Hirwani, C. K. (2018), Thermoacoustic Behavior of Laminated Composite Curved Panels Using Higher-Order Finite-Boundary Element Model, International Journal of Applied Mechanics, Vol. 10 (2), pp. 1850017, DOI: 10.1142/S1758825118500175 (IF: 1.954). SCIE
61. Hirwani, C. K., Panda, S. K., Mahapatra, T. R. (2018), Thermomechanical Deflection and Stress Responses of Delaminated Shallow Shell Structure using Higher-Order Theories, Composite Structures, Vol. 184, pp. 135-145, DOI: 10.1016/j.compstruct.2017.09.071 (IF: 6.3). SCI
62. Sharma, N., Mahapatra, T. R. and Panda, S. K., (2018) Evaluation of vibroacoustic responses of laminated composite sandwich structure using higher-order finite-boundary element model, Steel and Composite Structures, Vol. 28 (5), pp. 629-639 (IF: 4.6) SCI.
63. Sharma, N., Mahapatra, T. R., Panda, S. K. (2018), Vibro-acoustic analysis of laminated composite plate structure using structure-dependent radiation modes: An experimental validation, Scientia Iranica, Vol. 25 (5B), pp. 2706-2721, DOI: 10.24200/sci.2018.20420 (IF: 1.025) SCIE
64. Mehar, K., Panda, S. K. and Mahapatra, T. R. (2018), Thermoelastic Deflection Responses of CNT Reinforced Sandwich Shell Structure using Finite Element Method, Scientia Iranica, Vol. 25 (5B), pp. 2722-2737, DOI: 10.24200/SCI.2017.4525 (IF: 1.025) SCIE
65. Hirwani, C. K., Panda, S. K., Mahapatra, T. R., Mandal, S. K., Mahapatra, S. S. and De, A. K. (2018), Delamination effect on flexural responses of layered curved shallow shell panel-Experimental and numerical analysis, International Journal of Computational Methods, Vol. 15 (4), pp. 1850027, DOI: 10.1142/S0219876218500275 (IF: 1.053). SCIE
66. Katariya, P. V., Panda, S. K. and Mahapatra, T. R. (2018) Bending and vibration analysis of skew sandwich plate, Aircraft Engineering and Aerospace Technology, Vol. 90 (6), pp.885-895, DOI: 10.1108/AEAT-05-2016-0087, (IF: 0.519) SCI
67. Sharma, N., Mahapatra T. R., Panda, S. K., Sahu, P., (2018) Characterization of the Acoustic Radiation Properties of Laminated and Sandwich Composite Panels in Thermal Environment, IOP Conference Series: Materials Science and Engineering, Vol. 338(1), 012031, DOI: 10.1088/1757-899X/338/1/012031. (IF: 0.39, SCOPUS)
68. Sharma, N., Mahapatra, T. R. and Panda, S. K., (2018) Analysis of vibro-acoustic response of un-baffled laminated composite conical shell panel with varying thickness, IOP Conf. Series: Materials Science and Engineering 377, 012139, DOI: 10.1088/1757-899X/377/1/012139, (IF: 0.39) (SCOPUS)
69. Sharma, N., Mahapatra, T. R. and Panda, S. K., Mazumdar, A. (2018) Acoustic radiation characteristics of un-baffled laminated composite conical shell panels, Materials Today: Proceedings, Vol. 5 (11), pp. 24387-24396, DOI: 10.1016/j.matpr.2018.10.234, (IF: 2.59) (SCOPUS)
70. Dash, S, Sharma, N, Mahapatra, T. R., Panda, S. K. and Sahu, P (2018) Free vibration analysis of functionally graded sandwich flat panel, IOP Conf. Series: Materials Science and Engineering, Vol. 377 (1) 012140, doi:10.1088/1757-899X/377/1/012140, (IF: 0.39) (SCOPUS)
71. Sahoo, S., Mahapatra, T. R. (2018) ANN Modeling to study strength loss of Fly Ash Concrete against Long term Sulphate Attack, Materials Today: Proceedings, Vol. 5 (11), pp. 24595-24604, DOI: 10.1016/j.matpr.2018.10.257, (IF: 0.94) (SCOPUS)
72. Behera, A., Behera, R. K., Sahu, P., Swain, R. R., Mahapatra, T.R. (2018) Tensile and Failure Behavior of Kevlar Fiber Reinforced Epoxy Matrix Composite Exposed to Different Environmental Conditions, Materials Today: Proceedings, Vol. 5 (9), pp. 20250-20256, DOI: 10.1016/j.matpr.2018.06.396, (IF: 0.94) (SCOPUS)
2017
73. Katariya, P. V., Panda, S. K. and Mahapatra, T. R., (2017) Nonlinear thermal buckling behaviour of laminated composite panel structure including the stretching effect and higher-order finite element, Advances in Materials Research, Vol. 6 (4), pp. 349-361, DOI: https://doi.org/10.12989/amr.2017.6.4.349, (IF: 0.933) SCIE, SCOPUS
74. Sharma, N., Mahapatra, T. R., Panda, S. K. (2017), Vibro-acoustic behaviour of shear deformable laminated composite flat panel using BEM and the higher order shear deformation theory, Composite Structures, Vol. 180 (15), pp. 116-129, DOI: 10.1016/j.compstruct.2017.08.012 (IF: 6.3). SCI
75. Mehar, K., Panda, S. K., and Mahapatra, T. R. (2017) Theoretical and experimental investigation of vibration characteristic of carbon nanotube reinforced polymer composite structure, International Journal of Mechanical Sciences, Vol. 133, pp. 319-329, DOI: 10.1016/j.ijmecsci.2017.08.057 (IF: 2.481) SCI, SCIE and SCOPUS
76. Sharma, N., Mahapatra, T. R. and Panda, S. K., (2017) Vibro-acoustic analysis of un-baffled curved composite panels with experimental validation, Structural Engineering and Mechanics, Vol. 64 (1), pp. 93-107, DOI: 10.12989/sem.2017.64.1.093 (IF: 1.114) SCI
77. Mahapatra, T. R., Kar, V. R., and Panda, S. K., (2017), Nonlinear thermoelastic deflection of temperature-dependent FGM curved shallow shell under nonlinear thermal loading, Journal of Thermal Stresses, Vol. 40 (9), pp. 1184-1199, DOI:10.1080/01495739.2017.1302788, (IF: 1.364). SCI
78. Hirwani, C. K., Panda, S. K., Mahapatra, T. R. and Mahapatra, S. S. (2017) Numerical Study and Experimental Validation of Dynamic Characteristics of Delaminated Composite Flat and Curved Shallow Shell Structure, Journal of Aerospace Engineering, Vol. 30 (5), pp. 04017045 (1-16) DOI: 10.1061/(ASCE)AS.1943-5525.0000756, (IF: 0.76), SCI.
79. Mehar, K., Panda, S. K. and Mahapatra, T. R. (2017) Thermoelastic Nonlinear Frequency Analysis of CNT Reinforced Functionally Graded Sandwich Structure, European Journal of Mechanics / A Solids, Vol. 65, pp. 384-396, DOI: 10.1016/j.euromechsol.2017.05.005, (IF: 2.453) SCI
80. Mehar, K., Panda, S. K., Bui, T. Q. and Mahapatra, T. R. (2017) Nonlinear thermoelastic frequency analysis of functionally graded CNT-reinforced single/doubly curved shallow shell panels by FEM, Journal of Thermal Stresses, Vol. 40 (7), pp. 899-916, DOI: 10.1080/01495739.2017.1318689 (IF: 1.364), SCI.
81. Hirwani, C. K., Mahapatra, T. R.,Panda, S. K., Sahoo, S. S., Singh, V. K. and Patle, B. K. (2017) Nonlinear Free Vibration Analysis of Laminated Carbon/Epoxy Curved Panels: Theoretical and Experimental Investigation, Defence Science Journal, Vol. 67, No. 2, pp. 207-218, DOI:10.14429/dsj.67.10072, (IF: 0.428), SCIE, SCOPUS.
82. Sahoo, S. S., Mahapatra, T. R., Panda, S. K., and Singh, V. K. (2017), Numerical investigation on the nonlinear flexural behaviour of wrapped glass/epoxy laminated composite panel and experimental validation, Archive of Applied Mechanics, Vol. 87 (2), pp. 315-333, DOI: 10.1007/s00419-016-1195-8, (IF: 1.103) SCI
83. Kar, V. R., Mahapatra, T. R. and Panda, S. K., (2017), Effect of different temperature load on thermal postbuckling behaviour of functionally graded shallow curved shell panels, Composite Structures, Vol. 160 (15), pp. 1236-1247, DOI: 10.1016/j.compstruct.2016.10.125, (IF: 6.3) SCI
84. Dutta, G., Panda, S. K., Mahapatra, T. R., and Singh, V. K. (2017), Electro-Magneto-Elastic Response of Laminated Composite Plate: A Finite Element Approach, International Journal of Applied and Computational Mathematics, Vol. 3 (3), pp. 2573–2592, DOI: 10.1007/s40819-016-0256-6, (IF: 0.653) SCIE
85. Sharma, N., Mahapatra, T. R. and Panda, S. K. (2017), Numerical Study of Vibro-Acoustic Responses of Un-Baffled Multi-Layered Composite Structure under Various End Conditions and Experimental Validation, Latin American Journal of Solids and Structures, Vol. 14 (8), pp. 1547-1568, DOI: 10.1590/1679-78253830, (IF: 1.481, SCIE, SCOPUS).
86. Hirwani, C. K., Panda, S. K., Mahapatra, T. R. and Mahapatra, S. S. (2017), Nonlinear transient finite-element analysis of delaminated composite shallow shell panels, AIAA Journal, Vol. 55 (5), pp. 1734-1748, DOI: 10.2514/1.J055624, (IF: 1.207) SCI.
87. Katariya, P. V., Panda, S. K. and Mahapatra, T. R. (2017) Prediction of nonlinear eigenfrequency of laminated curved sandwich structure using higher-order equivalent single-layer theory, Journal of Sandwich Structures and Materials, 21(8), 2846-2869. DOI: 10.1177/1099636215577363 (IF: 2.852). SCI
88. Kataria, P. V., Panda, S. K. and Mahapatra, T. R. (2017) Effect of Skew Angle on Free Vibration Responses of Sandwich Composite Plate, International Journal of Research in Mechanical Engineering and Technology, Vol. 7 (1), pp. 21-24
89. Mahapatra, T. R., Mehar, K., Panda, S. K., Dewangan, S. and Dash, S., (2017) Flexural Strength of Functionally Graded Nanotube Reinforced Sandwich Spherical Panel, IOP Conference Series: Materials Science and Engineering, Vol. 178, (012031) DOI: 10.1088/1757-899X/178/1/012031, (IF: 0.39) (SCOPUS)
90. Panda, S. K., Mahapatra, T. R. and Kar, V. R. (2017) Nonlinear Finite Element Solution of Post-buckling Responses of FGM Panel Structure under Elevated Thermal Load and TD and TID Properties, MATEC Web of Conferences, Vol. 109, 05005, DOI: 10.1051/matecconf/201710905005, (SCOPUS)
91. Mahapatra, T. R., Dewangan, S., Dash, S. and Panda S. K. (2017), Flexural Behavior of Functionally Graded Sandwich Plates, International Journal of Research in Mechanical Engineering and Technology, Vol. 7 (1), pp. 25-29.
2016
92. Singh, V. K., Mahapatra, T. R. and Panda, S. K (2016), Nonlinear transient analysis of smart laminated composite plate integrated with PVDF sensor and AFC actuator, Composite Structures, Vol. 157, pp. 121–130, DOI: 10.1016/j.compstruct.2016.08. 020 (IF: 6.3) SCI
93. Mahapatra, T. R., Panda, S. K. and Kar, V. R., (2016), Nonlinear hygro-thermo-elastic vibration analysis of doubly curved composite shell panel using finite element micromechanical model, Mechanics of Advanced Materials and Structures, Vol. 23 (11), pp. 1343-1359, DOI: 10.1080/15376494.2015.1085606, (IF: 2.8). SCI
94. Singh, V. K., Mahapatra, T. R. and Panda, S. K (2016), Nonlinear flexural analysis of single/doubly curved smart composite shell panels integrated with PFRC actuator, European Journal of Mechanics - A/Solids, Vol. 60, pp. 300–314, DOI: http://dx.doi.org/ 10.1016/j.euromechsol.2016.08.006 (IF: 4.1) SCI
95. Mahapatra, T. R., Kar, V. R., and Panda, S. K., (2016), Large Amplitude Free Vibration Analysis of Laminated Composite Spherical Panel under Hygrothermal Environment, International Journal of Structural Stability and Dynamics, Vol. 16 (3), pp. 1450105 (22 pages) DOI: 10.1142/S0219455414501053, (IF: 1.617). SCIE
96. Mahapatra, T. R., and Panda, S. K. (2016), Nonlinear free vibration analysis of laminated composite spherical shell panel under elevated hygrothermal environment: A micromechanical approach, Aerospace Science and Technology, Vol. 49, pp. 276–288 DOI: http://dx.doi.org/10.1016/j.ast.2015.12.018 (IF: 5.6). SCI
97. Mahapatra, T. R., Kar, V. R., and Panda, S. K. (2016), Large amplitude bending behaviour of laminated composite curved panels, International Journal for Computer-Aided Engineering and Software, Engineering Computations, Vol. 33 (1), pp. 116-138, DOI: http://dx.doi.org/10.1108/EC-05-2014-0119 (IF: 1.67) SCIE
98. Mahapatra, T. R., Kar, V. R., and Panda, S. K. (2016), Nonlinear flexural analysis of laminated composite spherical shells under hygro-thermo-mechanical loading-a micromechanical approach, International Journal of Computational Method, Vol. 13 (3), pp. 1650015 DOI: 10.1142/S0219876216500158 (IF: 1.7) SCI.
99. Kar, V. R., Mahapatra, T. R., and Panda, S. K. (2016) Thermal buckling behaviour of shear deformable functionally graded single/doubly curved shell panel with TD and TID properties, Advances in Materials Research, An international journal, Vol. 5, No. 4, pp. 205-221, (IF: 3.8), SCI.
100. Mahapatra, T. R., Panda, S. K. and Kar, V. R., (2016), Geometrically nonlinear flexural analysis of hygro-thermo-elastic laminated composite doubly curved shell panel, International Journal of Mechanics and Materials in Design, Vol. 12 (2), pp. 153–171, DOI: 10.1007/s10999-015-9299-9, (IF: 3.7). SCI
101. Sahoo, S. S., Panda, S. K. and Mahapatra, T. R. (2016), Static, free vibration and transient response of laminated composite curved shallow panel - An experimental approach, European Journal of Mechanics - A/Solids, Vol. 59, pp. 95-113, DOI: http://dx.doi.org/ 10.1016/j.euromechsol.2016.03.0140997-7538 (IF: 4.1) SCI
102. Mahapatra, T. R. and Panda, S. K., (2016), Hygrothermal effects on the flexural strength of laminated composite cylindrical panels, IOP Conference Series: Materials Science and Engineering, Vol. 115 pp. 012040 (1-10), DOI: doi:10.1088/1757-899X/115/1/012040 (IF: 0.32) (SCOPUS)
103. Mahapatra, T. R., Panda, S. K. and Dash, S., (2016) Effect of hygrothermal environment on the nonlinear free vibration responses of laminated composite plates: A nonlinear finite element micromechanical approach, IOP Conf. Series: Materials Science and Engineering 149, 012151 DOI: 10.1088/1757-899X/149/1/012151, (IF: 0.39) (SCOPUS)
104. Dewangan, S., Mahapatra, T. R. and Sharma, N., (2016) Flexural analysis of laminated composite flat panel, International Conference on “Recent Trends in Mechanical, Material Science, Manufacturing, Automobile, Aerospace Engineering and Applied Physics” (AMAEAP-2016), JNU, New Delhi, 30th April, Journal of Material Science and Mechanical Engineering, Vol. 3 (3) pp. 219-223. (IF:0.8)
105. Mahapatra, T. R., Kar, V. R., and Panda, S. K., (2015), Nonlinear free vibration analysis of laminated composite doubly curved shell panel in hygrothermal environment, Journal of Sandwich Structures and Materials, Vol. 17 (5), pp. 511-545 DOI: 10.1177/1099636215577363 (IF: 3.9). SCI
106. Mahapatra, T. R.and Panda, S. K., (2015), Thermoelastic vibration analysis of laminated doubly curved shallow panels using non-linear FEM, Journal of Thermal Stresses, Vol. 38 (1), pp. 39-68, DOI: 10.1080/01495739.2014.976125, (IF: 2.8). SCI
107. Kar, V. R., Mahapatra, T. R., and Panda, S. K (2015), Nonlinear flexural analysis of laminated composite flat panel under hygro-thermo-mechanical loading, Steel and Composite Structures An International Journal, Vol. 19 (4), pp. 1011-1033, DOI: http://dx.doi.org/10.12989/scs.2015.19.4.1011 (IF: 4.6) SCI
108. Mahapatra, T. R. and Panda, S. K., (2015), Effects of hygrothermal conditions on free vibration behaviour of laminated composite structures, NCPCM 2014 December 5th-6th, National Institute of Technology Rourkeal, Published in: IOP Conference Series: Materials Science and Engineering, Vol. 75 pp. 012016 (1-10) DOI: 10.1088/1757-899X/75/1/012017, (IF: 0.39) (SCOPUS)
109. Panda, S. K., and Mahapatra, T. R. (2014), Nonlinear Finite Element Analysis of Laminated Composite Spherical Shell Vibration under Uniform Thermal Loading, Meccanica, Vol. 49 (1), pp. 191-213, DOI: 10.1007/s11012-013-9785-9 (IF: 2.7) SCI
110. Mahapatra, T. R., Panda S. K., and Kar, C. (2014), Vibration behaviour of laminated composite flat panel under hygrothermal environment, Innovative Trends in Mechanical, Material, Manufacturing, Automotive, Automobile and Aeronautical Engineering” (ITMMMAAAE-2014) published in International Review of Applied Engineering Research, Vol. 4 (5), pp. 455-464
111. Mahapatra, T. R., Panda S. K., and Kar, C. (2014), Nonlinear bending analysis of shear deformable laminated composite flat panel, International Conference on Advances in Engineering and Technology, Pune, India, 1st-3rd September published in International Journal of Engineering Sciences, Vol. 7 (2), pp. 71-76.

National Publications

1. NIL

International Conferences

1. Punyapriya Mishra, Trupti Ranjan Mahapatra and Debadutta Mishra, (2023) Effect of graphite filler on the dielectric properties of polymer composites, 5th International Conference on Processing and Characterization (ICPCM 2023), 8-10 December 2023, NIT, Rourkela.
2. Trupti Ranjan Mahapatra, Punyapriya Mishra and Debadutta Mishra, (2023) Modelling and analysis for thermal and structural properties of polymer nano composites, 5th International Conference on Processing and Characterization (ICPCM 2023), 8-10 December 2023, NIT, Rourkela.
3. Rima Singha Roy, Sushmita Dash, Trupti Ranjan Mahapatra, Punyapriya Mishra, Debadutta Mishra (2023), Analysis of Cutting Performance in Dry Turning using Surface Textured Tools: Quantitative analysis, 28th to 30th November, Alliance Technology Conference (ATCON-2) “First Joint International Conference on Advances in Mechanical and Aerospace Engineering (ATCON 2: ICAMAE 2023)” organized by Alliance University, Bangalore, India & University of Strathclyde, United Kingdom
4. Anisha Ekka, Trupti Ranjan Mahapatra, Pradip Kumar Sahu, Punyapriya Mishra, Debadutta Mishra, (2023) Analysis of Mechanical Responses of Fly Ash Filled GFRP Composite Plates using Finite Element Method, 28th to 30th November, Alliance Technology Conference (ATCON-2) “First Joint International Conference on Advances in Mechanical and Aerospace Engineering (ATCON 2: ICAMAE 2023)” organized by Alliance University, Bangalore, India & University of Strathclyde, United Kingdom
5. S. R. Parimanik, A. K. Mahapatra, T. R. Mahapatra, D. Mishra (2023) Parametric Analysis of Nd: YAG Laser Welding of NiTi SMA wires using Taguchi Quality Loss and Grey Relational method, 4th International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD-23), 20th-22nd July, Institute of Technical Education and Research, Odisha, India.
6. I Rout, C K Nanda, T R Mahapatra, D Mishra (2023) Characterization and Dry Sliding Wear Behaviour of Luffa Cylindrica/Human Hair Fibre-Reinforced Hybrid Composite, 4th International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD-23), 20th-22nd July, Institute of Technical Education and Research, Odisha, India.
7. L. Mishra, T. R. Mahapatra, D. Mishra, S. R. Parimanik, A. K. Rout (2023) Parametric Optimization of hole quality in Nd:YAG laser drilled Carbon black/Epoxy composite by grey based whale optimization technique, 4th International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD-23), 20th-22nd July, Institute of Technical Education and Research, Odisha, India.
8. B. Dash, T. R. Mahapatra, D. Mishra, A. K. Rout (2022) Acoustic radiation efficiencies of laminated composite structure under mechanical excitation and hygrothermal loading: Numerical analysis, 4th International Conference on Processing and Characterization of Materials (ICPCM-2022), 9-11th Dec, National Institute of Technology, Rourkela.
9. A. Ekka, A. Panda, T. R. Mahapatra, D. Mishra, (2022) Erosion and wear analysis of fly ash filled GFRP composite, 2nd International Conference & Exposition on Mechanical, Material and Manufacturing Technology (ICE3MT 2022), 28-29th Oct, CVR College of Engineering, Hyderabad.
10. I. Rout, T. R. Mahapatra, A. K. Rout, D. Mishra, A. K. Rout, (2022) Study on effect of process parameters on AJM of partially biodegradable hybrid composite using TOPSIS approach, 2nd International Conference on Advances in Materials and Manufacturing Technology (ICAMMT-2022), 22nd-26th Nov, Maulana Azad National Institute of Technology, Bhopal, India.
11. L. Mishra, T. R. Mahapatra, S. R. Parimanik, S. Dash, D. Mishra, (2022) Optimization of Process Parameters in Nd: YAG laser drilling of Carbon Black/Epoxy composite utilizing Grey relational analysis and Response surface methodology, 2nd International Conference on Advances in Materials and Manufacturing Technology (ICAMMT-2022), 22nd-26th Nov, Maulana Azad National Institute of Technology, Bhopal, India.
12. Roy R. S., Dash S., Mahapatra T. R., Mishra D., Jaypuria S. (2021) Cutting Performance Analysis of Surface Textured Tools in Dry Turning: Optimisation of process parameters, 12th International Conference on Material Processing and Characterization (ICMPC-2021), 6th-9th Oct, NITTTR, Chandigarh.
13. S. R. Parimanik, T. R. Mahapatra, D. Mishra, A. K. Rout (2021) Dissimilar Laser Welding of NiTi Alloy with Ferrous and Non- ferrous Material: Optimization of Process Parameters, 12th International Conference on Material Processing and Characterization (ICMPC-2021), 6th-9th Oct, NITTTR, Chandigarh.
14. S. R. Parimanik, T. R. Mahapatra, D. Mishra, A. K. Rout (2021) Optimization of Performance Characteristic in Laser Welding of Nitinol Wires using Taguchi and Grey Relation Analysis, 2nd International Conference on Industrial & Manufacturing Systems (CIMS-2021), 11-13th Nov, PEC, Chandigarh, and NIT, Jalandhar.
15. Das, M., Mahapatra, T. R., Mishra, D. (2019) Machinability of Metal Matrix Composites: A Review, 9th International Conference on Materials Processing and Characterization (ICMPC-2019), 08th-10th Mar, GRIET, Hyderabad, India.
16. Jaypuria, S., Mahapatra, T. R., Jaypuria, O. (2019) Metaheuristic Tuned ANFIS Model for Input-Output Modeling of Friction Stir Welding, 9th International Conference on Materials Processing and Characterization (ICMPC-2019), 08th-10th Mar, GRIET, Hyderabad, India.
17. Dash, B., Das, M., Das, M., Mahapatra, T. R., Mishra, D. (2019) A Concise Review on Machinability of NiTi Shape Memory Alloys, 9th International Conference on Materials Processing and Characterization (ICMPC-2019), 08th-10th Mar, GRIET, Hyderabad, India.
18. Jaypuria, S., Khandai, S., Mahapatra, T. R., Singh, A. (2019) Development of Activated Flux for Deep Penetration in GTAW, 9th International Conference on Materials Processing and Characterization (ICMPC-2019), 08th-10th Mar, GRIET, Hyderabad, India.
19. Jaypuria, S., Mahapatra, T. R., Tripathy, S., Nakhale, S., Gupta, S. K., (2019) Fuzzy C-Means Clustering Based ANFIS Regression Modeling of Hybrid Laser-TIG Fabrication, International Conference on Advances in Materials and Manufacturing Engineering (ICAMME 2019), 15th-17th Mar, KIIT University, Bhubaneswar, India.
20. Sahu, P., Dansana, B., Sahu, S. K. and Mahapatra, T. R. (2018) Tribological and electrochemical corrosion performance analysis of Hastelloy C276 under different loading conditions, 3rd International Conference on "Advances in Materials and Manufacturing Applications (IConAMMA 2018), 16th-18th August, Amrita School of Engineering, Bengaluru Campus, Bengaluru, Karnataka, India.
21. Agarwal, S., Dash, B., Saini, P., Sharma, N., Mahapatra, T. R. and Panda, S. K., (2018) Vibroacoustic analysis of un-baffled layered composite plate under thermal environment, 3rd International Conference on "Advances in Materials and Manufacturing Applications (IConAMMA 2018), 16th-18th August, Amrita School of Engineering, Bengaluru Campus, Bengaluru, Karnataka, India.
22. Ranjan, S., Khan, R., Dash, S., Sharma, N., Mahapatra, T. R. and Panda, S. K., (2018) Thermo-elastic free vibration analysis of functionally graded flat panel with temperature gradient along thickness, 3rd International Conference on "Advances in Materials and Manufacturing Applications (IConAMMA 2018), 16th-18th August, Amrita School of Engineering, Bengaluru Campus, Bengaluru, Karnataka, India.
23. Sharma, N., Mahapatra, T. R. and Panda, S. K., (2017) Analysis of vibro-acoustic response of un-baffled laminated composite conical shell panel with varying thickness, ICMMRE 2017, 8th-10th December, Sikkim Manipal Institute of Technology, Majitar, East Sikkim, India.
24. Dash, S., Sharma, N., Mahapatra, T. R., Panda, S. K., and Sahu, P., (2017) Free vibration analysis of functionally graded sandwich flat panel, ICMMRE 2017, 8th-10th December, Sikkim Manipal Institute of Technology, Majitar, East Sikkim, India.
25. Sharma, N., Mahapatra, T. R. and Panda, S. K., (2017) Acoustic radiation characteristics of un-baffled laminated composite conical shell panels, IConAMMA-2017, Amrita Vishwa Vidyapeetham University, Bangalore, India.
26. Sahoo, S., Mahapatra, T. R. (2018) ANN Modeling to study strength loss of Fly Ash Concrete against Long term Sulphate Attack, IConAMMA-2017, Amrita Vishwa Vidyapeetham University, Bangalore, India.
27. Panda, S. K., Mahapatra, T. R. and Kar, V. R. (2017) Nonlinear Finite Element Solution of Post-buckling Responses of FGM Panel Structure under Elevated Thermal Load and TD and TID Properties, International Conference on Advanced Technologies in Manufacturing and Materials Engineering (ATMME 2017), Bangkok, Thailand.
28. Mahapatra, T. R., Dewangan, S., Dash, S. and Panda, S. K., (2016) Flexural Behavior of Functionally Graded Sandwich plates, 3rd International Conference on Advancements in Engineering, Technology and Management (AETM 2017), 6th January, 2017, Bangkok, Thailand
29. Mahapatra, T. R. and Panda, S. K., (2015) Hygrothermal Free Vibration Analysis of Laminated Composite Flat Panels Using A Nonlinear Finite Element Micromechanical Model, International Conference on Computer Aided Engineering (CAE-2015), GITAM University, Hyderabad, India, December 10-12.
30. Mahapatra, T. R., and S. K. Panda. (2014) Nonlinear Bending Analysis of Shear Deformable Laminated Composite Flat Panel Proceedings of the 15th Annual Paper Meet 07-08 February 2014 Dhaka, Bangladesh.
31. Mahapatra, T. R., and Panda, S. K. (2013) Nonlinear Vibration Analysis of Laminated Shells in Thermal Environments, 4thInternational Conference on recent Advances in Composite Material (ICRACM)18 – 21 February.
32. Panda, S. K., and Mahapatra, T. R. (2012) Geometric Nonlinear vibration Analysis of Heated Laminated Cylindrical Panel, ACUN6 –Composites and Nanocomposites in Civil, Offshore and Mining Infrastructure, Melbourne, Australia, 14th–16th November.

National Conferences

1. Pratyush Kumar Sahu, Trupti Ranjan Mahapatra, Punyapriya Mishra and Debadutta MishraCentral Defection Optimization of Laminated Composite Plate under Static Load using Nonlinear FEM and Metaheuristic methods, National Conference on “Recent Advancement in Materials and Manufacturing-2023 (RAMM-2023)" organized by Central Institute of Petrochemicals Engineering and Technology (CIPET): IPT-Bhubaneswar, 3rd-4th Nonember 2023.
2. Anisha Ekka, T. R. Mahapatra, Pradip Kumar Sahu, Punyapriya Mishra, Debadutta Mishra, Characterization and Finite Element Analysis of Fly Ash Filled GFRP Composites, National Conference on “Recent Advancement in Materials and Manufacturing-2023 (RAMM-2023)" organized by Central Institute of Petrochemicals Engineering and Technology (CIPET): IPT-Bhubaneswar, 3rd-4th Nonember 2023.
3. B. Dash, T. R. Mahapatra, S. Dash, D. Mishra (2023) Numerical Analysis on Vibroacoustic Properties of Cylindrical Laminated Composite Shells under Hygrothermal Environment, 50th National Symposium on Acoustics (NSA-2023) “Emerging Trends in Acoustical Science, Design & Technology”, 24-26th Feb, Veer Surendra Sai Univercity of Technology, Burla, India.
4. Mahapatra, T. R. (2018) Prominence of HSDT in computation of hygro-thermo-acoustic response of laminated composite structure, 42nd Indian Social Science Congress, 27th- 31st December 2018, KIIT (Deemed to be University), Bhubaneswar, India.
5. Sharma, N., Mahapatra T. R., Panda, S. K., and Sahu, P., (2017) Characterization of the Acoustic Radiation Properties of Laminated and Sandwich Composite Panels in Thermal Environment, NCPCM, 8th - 10th December, NIT Rourkela, Odisha, India.
6. Kataria, P. V., Mahapatra, T. R., and Panda, S. K. (2013), Stability Analysis of Laminated Composite Cylindrical Shell Structure under uni-axial loading, All India Seminar on Recent Advances in Mechanical Engineering, Odisha State Centre Institution of Engineers (India), Bhubaneswar, India, 16-17 March.
7. Mahapatra, T. R., Panda, S. K., and Mishra P. K. (2012) Curvature effect on free vibration behavior laminated composite shell panel, NASOME-2012, KIIT University, Bhubaneswar, India, 18-19 February.

Workshops

1. “Inculcating Universal Human Values in Technical Education”, 3-day Face-to-Face FDP, VSSUT, Burla, organized by All India Council for Technical Education (AICTE), 8-10 September 2023.
2. Online Webinar on “Strategies of Stress Free Healthy Life (SSFHL-2022)”, 5 days, NIT Rourkela, GATI, DST, India.
3. Online Elementary FDP on “Classical Optimization Techniques in Manufacturing Systems”, Guru Nanak Institutions Technical Campus, Telengana, 5 days, AICTE Training and Learning (ATAL) Academy.
4. Online FDP on the theme “Inculcating Universal Human Values in Technical Education”, 5 days, AICTE.
5. Workshop on Intellectual Property Rights, 8th November 2019, SPIU, Odisha.
6. Short-Term Training Program on “Industry 4.0 & Condition Monitoring”, Guru Nanak Institutions Technical Campus, Telangan, 1 week, AICTE Training and Learning (ATAL) Academy.
7. STTP on “Fundamental and Applications of Nanomaterials”, 5 Days, NITTTR, Kolkata.
8. STTP on “Numerical and Statistical Methods with SCILAB”, 5 Days, NITTTR, Kolkata.
9. Online “Professional Development Training”, IIM, Raipur, 3 days, TEQUIP-III.
10. Training on “Entrepreneurship Development Program” conducted as a part of IIC Innovation Ambassador Training Series, Indian Institute of Science Education and Research, Kolkata, 2 days, Institution’s Innovation Council of MHRD’s Innovation Cell, AICTE.
11. FDP on “Advances in Materials & Machining Processes for Recent Industrial Applications”, VSSUT, Burla, 5 Days, TEQUIP-3.
12. STTP on “Advance of Materials Design, Machining and Characterization (AMDMC-2020)”, VSSUT, Burla, 1 week, AQIS Scheme of AICTE.
13. STTP on “Bio-Energy: Technology & Transitions”, 5 Days, National Institute of Technology, Kurukshetra and Government Engineering College, Bikaner, TEQUIP-III: Mentoring/Twinning System.
14. Innovations in Product Design and Sustainable Manufacturing – IPDSM 2020, 5 Days, Government College of Engineering, Kalahandi, Odisha.
15. FDP on “Outcome Based Education Software”, 1 Day, Vmedulife Software Services, India.
16. Hands on training on Solar Study Lamp Assembly, IITBombayX, Student Solar Ambassador Workshop 2019.
17. Faculty Development Programme on “Advances in Materials & Machining Processes for Recent Industrial Applications”, VSSUT, Burla, Sponsored by TEQIP-3, Government of India.
18. Short course on “Learn to Design your Solar Home Systems”, VSSUT, Burla Energy Swaraj Foundation.,
19. Application of Optimization Technique on Advanced Manufacturing Processes (AOTAMP-2019), VSSUT, Burla, 1 week, TEQIP-III sponsored Workshop.
20. Functional Engineering Material: Technology, Modeling and Analysis (FEMTMA-2018), VSSUT, Burla, 2 week, AICTE QIP Sponsored Short Term Course.
21. Engineering Materials, Design and Analysis (EMDA-2018), VSSUT, Burla, 1 week, AICTE QIP Sponsored Short Term Course.
22. Recent Advances in Machining Processes (RAMP-2018), VSSUT, Burla, 1 week, AICTE QIP Sponsored Short Term Course.
23. Materials, Manufacturing and Management (MMM-2018), VSSUT, Burla, 1 week, AICTE QIP Sponsored Short Term Course.
24. Workshop on “High Impact Teaching Skills”, KIIT University, 4 days, Mission10X training program conducted by Wipro
25. Application of Non-conventional Energies in Rural areas, NITTTR Kolkata, 5 days, MHRD, Govt. of India
26. Power Hydraulics and Pneumatics, NITTTR Kolkata, 5 days, MHRD, Govt. of India

IoT Based Road Cutter: Application Number: 349686-001: Design Accepted and Published, Journal No 49/2023 and Date 08/12/2023; A Novel Spring Design Method for Vehicular Suspension System: Application Number: 202131046126: Published (12/11/2021); A Smart Automatic Tap and Indicator: Application Number: 202231003134: Published (18/02/2022); Adjustable Automatic Guided Agriculture Vehicle: Application Number: 202331055723: Applied (Awaiting Complete Specification).

1. Supervised Machine Learning Algorithms for Machinability Assessment of Graphene Reinforced Aluminium Metal Matrix Composites, Smart Technologies for Improved Performance of Manufacturing Systems and Services, 2024, 163-180, CRC Press.
2. Parametric Optimization in Nd:YAG Laser Micro-drilling of Carbon Black/Epoxy Composite Utilizing GRA and Response Surface Methodology, Lecture Notes in Mechanical Engineering. (2023), 917–927 Springer, Singapore.
3. Study on Effect of Process Parameters on AJM of Partially Biodegradable Hybrid Composite Using TOPSIS Approach, Lecture Notes in Mechanical Engineering. (2023), 341–354, Springer, Singapore.
4. Implementation of FEM and Machine Learning Algorithms in the Design and Manufacturing of Laminated Composite Plate, Intelligent Manufacturing Management Systems: Operational Applications of Evolutionary Digital Technologies in Mechanical and Industrial Engineering, (2023), 23-247, John Wiley & Sons, Inc.
5. Constraints in Journey of Graphene from Laboratory to Life, Lecture Notes in Civil Engineering, 2021, 75, pp. 675-685. (2021)
6. Fuzzy C-means Clustering-Based ANFIS Regression Modeling of Hybrid Laser-TIG Fabrication, Lecture Notes in Mechanical Engineering, pp. 617-624.(2020)
7. Characterization of the Acoustic Radiation Properties of Laminated and Sandwich Composite Panels in Thermal Environment, IOP Conference Series: Materials Science and Engineering, Vol. 338(1), 012031, DOI: 10.1088/1757-899X/338/1/012031. (2018)
8. Thermo-elastic free vibration analysis of functionally graded flat panel with temperature gradient along thickness, IOP Conference Series: Materials Science and Engineering, 2019, 577(1), 012123 (IF: 0.39) (SCOPUS) (2019)
9. Analysis of vibro-acoustic response of un-baffled laminated composite conical shell panel with varying thickness, IOP Conf. Series: Materials Science and Engineering 377, 012139, DOI: 10.1088/1757-899X/377/1/012139, (IF: 0.39) (SCOPUS) (2018)
10. Free vibration analysis of functionally graded sandwich flat panel, IOP Conf. Series: Materials Science and Engineering, Vol. 377 (1) 012140, doi:10.1088/1757-899X/377/1/012140, (IF: 0.39) (SCOPUS) (2018)
11. ANN Modeling to study strength loss of Fly Ash Concrete against Long term Sulphate Attack, Materials Today: Proceedings, Vol. 5 (11), pp. 24595-24604, DOI: 10.1016/j.matpr.2018.10.257, (IF: 0.94) (SCOPUS) (2018)
12. Tensile and Failure Behavior of Kevlar Fiber Reinforced Epoxy Matrix Composite Exposed to Different Environmental Conditions, Materials Today: Proceedings, Vol. 5 (9), pp. 20250-20256, DOI: 10.1016/j.matpr.2018.06.396, (IF: 0.94) (SCOPUS) (2018)
13. Nonlinear Finite Element Solution of Post-buckling Responses of FGM Panel Structure under Elevated Thermal Load and TD and TID Properties, MATEC Web of Conferences, Vol. 109, 05005, DOI: 10.1051/matecconf/201710905005, (SCOPUS) (2017)
14. Flexural Strength of Functionally Graded Nanotube Reinforced Sandwich Spherical Panel, IOP Conference Series: Materials Science and Engineering, Vol. 178, (012031) DOI: 10.1088/1757-899X/178/1/012031, (IF: 0.39) (SCOPUS) (2017)
15. Acoustic radiation characteristics of un-baffled laminated composite conical shell panels, Materials Today: Proceedings, Vol. 5 (11), pp. 24387-24396, DOI: 10.1016/j.matpr.2018.10.234, (IF: 0.94) (SCOPUS) (2018)
16. Analysis of vibro-acoustic response of un-baffled laminated composite conical shell panel with varying thickness, IOP Conf. Series: Materials Science and Engineering 377 (2018) 012139 doi:10.1088/1757-899X/377/1/012139, (IF: 0.39) (SCOPUS) (2017)
17. Free vibration analysis of functionally graded sandwich flat panel, IOP Conf. Series: Materials Science and Engineering 377 (2018) 012140 doi:10.1088/1757-899X/377/1/012140, (IF: 0.39) (SCOPUS) (2017)
18. Effect of hygrothermal environment on the nonlinear free vibration responses of laminated composite plates: A nonlinear finite element micromechanical approach, IOP Conf. Series: Materials Science and Engineering 149, 012151 DOI: 10.1088/1757-899X/149/1/012151, (IF: 0.39) (SCOPUS) (2016)
19. Hygrothermal effects on the flexural strength of laminated composite cylindrical panels, IOP Conference Series: Materials Science and Engineering, Vol. 115 pp. 012040 (1-10), DOI: doi:10.1088/1757-899X/115/1/012040 (IF: 0.32) (SCOPUS) (2016)
20. Effects of hygrothermal conditions on free vibration behaviour of laminated composite structures, NCPCM 2014 December 5th-6th, National Institute of Technology Rourkeal, Published in: IOP Conference Series: Materials Science and Engineering, Vol. 75 pp. 012016 (1-10) DOI: 10.1088/1757-899X/75/1/012017, (IF: 0.39) (SCOPUS) (2015)

5 Days Online FDP on “Artificial Intelligence and Machine Learning” during 22nd – 26th November 2021 at Veer Surendra Sai University of Technology, Burla, Odisha. One Week ATAL Online FDP on “3D Printing & Design” during 18th-22nd January 2021 at Veer Surendra Sai University of Technology, Burla, Odisha. One Week ATAL Online FDP on “Data Sciences” during 16th-20nd November 2020 at Veer Surendra Sai University of Technology, Burla, Odisha. 5 Days Online Workshop/Training Program on “Structural and Acoustic Analysis using Commercial Software” during 23rd – 27th November 2020 at Veer Surendra Sai University of Technology, Burla, Odisha. 2 Days Online Seminar on “Sustainable and Digital Manufacturing towards Industry 4.0” during 10th – 11th September 2020 at Veer Surendra Sai University of Technology, Burla, Odisha. 2 Days Online Workshop on “Optimization Tools in Manufacturing Process” during 8th – 9th September 2020 at Veer Surendra Sai University of Technology, Burla, Odisha. 2 Days Online Training on “Entrepreneurship Development Program” conducted as part of “IIC Innovation Ambassador Training Series” during 6th – 7th March 2020 at Veer Surendra Sai University of Technology, Burla, Odisha. 2 Days Workshop on “Role of Revised Accreditation the Quality and Innovation in Education (RRAFEQIE)-2020” during 22nd – 23rd February 2020 at Veer Surendra Sai University of Technology, Burla, Odisha. One Week Workshop on “Optimization Techniques and Applications in Manufacturing (OTAM)” sponsored by Technical Education Quality Improvement Programme (TEQIP-III) during 15th to 19th January, 2019 at Department of Production Engineering, Veer Surendra Sai University of Technology, Burla, Odisha. One Week Short Term Course on “Composite: Manufacturing, Machining, Modeling and Optimization (CMMMO)” under Quality Improvement Programme (QIP) scheme of All India Council for Technical Education (AICTE), Government of India during 19th to 24th February, 2018 at Department of Production Engineering, Veer Surendra Sai University of Technology, Burla, Odisha. “Entrepreneurship Awareness Camp” under DST-NIMAT project 2018-19 sponsored by NSTEDB, DST, Government of India during 14th to 16th November, 2018.

Vice President, Students’ Cultural Society, VSSUT; Nodal Officer, IYDP (NUA:O), VSSUT; PIC, CRF, VSSUT; Associate Dean, SRIC; Head of Department, Metallurgical & Materials Engineering (MME), VSSUT; Warden-Pulastya Hall of Residence, VSSUT; Convenor, Institute Innovation Council (IIC), VSSUT; Member, Central Research Facility (CRF), VSSUT; Coordinator, IQAC (PE) for coordinating IQAC and accreditation (NBA, NAAC, Coordinator, R&D and Consultancy (PE), VSSUT; Member, Department Board of Studies; Department Purchase Committee, PE, VSSUT; Coordinator, PG (MSE and CAD/CAM & Robotics), PE, VSSUT; Coordinator, Laboratory Maintenance & Renovation work (PE), VSSUT; Faculty Advisor/Tutor Mentor; Member, Board of Studies, School of Mechanical Engineering, KIIT university, Bhubaneswar-From June 2015 (2 years); Member, Academic Council, KIIT university, Bhubaneswar-From November 2015 (2 years) ; Exam Coordinator, Term End Examinations, IGNOU Study Centre (2101), KIIT University, Bhubaneswar ; Faculty In charge, QA and Compliance (NBA/NAAC/IET Accreditation), School of Mechanical Engineering, KIIT University Bhubaneswar; Dy. Hostel Superintendent, KIIT Boys Hostel; Faculty In charge, Library of School of Mechanical Engineering at KIIT University Bhubaneswar.; Program Officer, NSS, School of Mechanical Engineering, KIIT University Bhubaneswar; Additional Faculty Adviser, KIIT Automotive Society.

Present Address :  Department of Production Engineering VSSUT, BURLA SAMBALPUR - 768018

Permanent Address :  At/Po: Laxminarayan Nagar, Ankoli, Berhampur, Dist: Ganjam, Odisha-760010