A A
Skip to Content
Skip to Navigation
Screen Reader Access
Text Size : A- A A+
registrar@vssut.ac.in 8480441756

Mechanical Engineering

Name : Dr. Priyadarshi Tapas Ranjan Swain
Designation : Assistant Professor
Phone No. : 9439000025
Email Id : ptrswain_me@vssut.ac.in
Date of Birth : 20-07-1988
Date of Joining : 04-09-2017
Google Scholar : Browse

B.Tech in Mechanical Engineering (BPUT) (2009), M.Tech in Mechanical Engineering (Thermal Engineering) (SOA University) (2012), Ph.D in Mechanical Engineering (NIT, Rourkela) (2018)

Thermal Engineering

Teaching : 7 Years Reasearch : 12 years

Graduate Level : Heat Transfer, Power Plant Engineering, Refrigeration and Air Conditioning, Internal Combustion Engine and Gas Turbine, Universal Human Value
Post Graduate Level : Advanced Engineer Thermodynamics, Advanced IC Engine

Composite Materials

Ph. D. Candidates : 01.5 No (Continuing)
M. Tech. Candidates : 07 No (Guided)
  1. National Distinguished Young Scientist Award 2021, awarded by International Institute of Organized Research I2OR Award n the field of education.
1. The Institution of Engineers Associate Member (Membership No: AM1842415) (Date: 07-Jan-2019) 2. Institute of Research Engineers and Doctors (Membership No: AM101000584162) (Date: 17-July-2019) 3. International Association of Engineers (Membership No: 235435) (Date: 18-Mar-2019) 4. International Association of Academic Plus Corporate Society (Membership No: 20IND532484A819) (Date: 08-June-2020)
  1. Research Grant under “Collaborative Research and Innovation Scheme” of TEQIP-III (VSSUT, Burla) with Project Title: Development of light weight fiber reinforced polymer composite for a low cost mobile shelter house order No. VSSUT/TEQIP/162/2021, dated 18-03-2021 with a Grant Sanctioned: INR 50,000/-.

International Publications

    2022
  1. Rout, L. N., Mishra, D., & Swain, P. T. R., (2022). “Influence of Silicon Carbide (SiC) Reinforcement on Sliding and Erosive Wear Characteristics of Glass Fiber/Epoxy Hybrid Composites”, Transactions of the Indian Institute of Metals, pp. 1-9, 2022, doi: https://doi.org/10.1007/s12666-022-02828-7
  2. Purohit, A., Tripathy, V., Mishra, S. K., Swain, P. T. R., & Patnaik, P. K., “Mechanical and Tribo-performance Analysis of Linz Donawitz Sludge-Filled Glass–Epoxy Composites using Taguchi Experimental Design”, Journal of The Institution of Engineers (India): Series E, vol. 103, no. 2, pp. 245-251, 2022, doi: https://doi.org/10.1007/s40034-021-00236-y
  3. Patnaik, P. K., Mishra, S. K., Swain, P. T. R., Purohit, A., Parija, S. K., & Panda, S. S., “Multi-objective optimization and experimental analysis of electro-discharge machining parameters via Gray-Taguchi, TOPSIS-Taguchi and PSI-Taguchi methods”, Materials Today: Proceedings, vol. 62, pp. 6189-6198, 2022, doi: https://doi.org/10.1016/j.matpr.2022.05.087
    4. 2020
  4. Patnaik, P. K., Mishra, S. K., Swain, P. T. R., & Panda, D., “Effect of Groundnut Shell Particulate Content on Physical and Mechanical Behavior of Jute–Epoxy Hybrid Composite”, Journal of The Institution of Engineers (India): Series E, pp. 1-8, 2020, doi: 10.1007/s40034-020-00185-y
  5. Patnaik, P. K., Swain, P. T. R., Purohit, A., & Biswas, S., “Tribological study on slurry abrasive wear behavior of nonwoven viscose fabric composites with doe approach”, Surface Review and Letters, vol. 27, no. 08, pp. 1950185, 2020, doi: https://doi.org/10.1142/S0218625X19501853
  6. Patnaik, P. K., Mishra, S. K., & Swain, P. T. R., “Erosion wear behavior of needle-punched nonwoven fabric (NPNF) reinforced epoxy composites–An evaluation using Taguchi’s design”, Materials Today: Proceedings, vol. 33, pp. 5683-5686, 2020, doi: https://doi.org/10.1016/j.matpr.2020.04.208
  7. Patnaik, P. K., Swain, P. T. R., Mishra, S. K., Purohit, A., & Biswas, S., “Composite material selection for structural applications based on AHP-MOORA approach”, Materials Today: Proceedings, vol. 33, pp. 5659-5663, 2020, doi: https://doi.org/10.1016/j.matpr.2020.04.063
  8. Purohit, A., Satapathy, A., Swain, P. T. R., & Patnaik, P. K., “Analysis of sliding wear behavior of LD sludge filled epoxy composites using response surface methodology”, Materials Today: Proceedings, vol. 33, pp. 5066-5069, 2020, doi: https://doi.org/10.1016/j.matpr.2020.02.845
  9. Purohit, A., Swain, P. T. R., & Patnaik, P. K., “Mechanical and sliding wear characterization of LD sludge filled hybrid composites”, Materials today: proceedings, vol. 26, pp. 1654-1659, 2020, doi: https://doi.org/10.1016/j.matpr.2020.02.345
  10. Purohit, A., Satapathy, A., & Swain, P. T. R., “Analysis of Erosion Wear Behavior of LD Sludge Filled Polypropylene Composites Using RSM”, Materials Science Forum, vol. 978, pp. 222-228, 2020, doi: https://doi.org/10.4028/www.scientific.net/MSF.978.222
  11. Swain, P. T. R., Das, S. N., Patnaik, P. K., & Purohit, A., “The influence of moisture absorption on the mechanical and thermal properties of chemically treated DPL reinforced hybrid composite”, Materials Science Forum, vol. 978, pp. 316-322, 2020, doi: https://doi.org/10.4028/www.scientific.net/MSF.978.316
  12. Patnaik, P. K., Swain, P. T. R., Mishra, S. K., Purohit, A., & Biswas, S., “Recent developments on characterization of needle-punched nonwoven fabric reinforced polymer composites–A review”, Materials Today: Proceedings, vol. 26, pp. 466-470, 2020, doi: https://doi.org/10.1016/j.matpr.2019.12.086
    13. 2019
  13. Patnaik, P. K., Swain, P. T. R., & Biswas, S., “Investigation of mechanical and abrasive wear behavior of blast furnace slag‐filled needle‐punched nonwoven viscose fabric epoxy hybrid composites”, Polymer Composites, vol. 40, no. 6, pp. 2335-2345, 2019, doi: https://doi.org/10.1002/pc.25090
  14. Patnaik, P. K., Swain, P. T. R., & Purohit, A., “Selection of composite materials for structural applications through MCDM approach”, Materials Today: Proceedings, vol. 18, pp. 3454-3461, 2019, doi: https://doi.org/10.1016/j.matpr.2019.07.273
  15. Purohit, A., Satapathy, A., Swain, P. T. R., & Patnaik, P. K., “A study on erosion wear behavior of ld sludge reinforced polypropylene composite”, Materials Today: Proceedings, vol. 18, pp. 4299-4304, 2019, doi: https://doi.org/10.1016/j.matpr.2019.07.388
    16. 2018
  16. Swain, P. T. R., & Biswas, S., “A comparative analysis of physico‐mechanical, water absorption, and morphological behaviour of surface modified woven jute fiber composites”, Polymer Composites, vol. 39, no. 8, pp. 2952-2960, 2018, doi: https://doi.org/10.1002/pc.24294
  17. Swain, P. T. R., Das, S. N., & Jena, S. P., (2018). “Manufacturing and Study of Thermo-Mechanical Behaviour of Surface Modified Date Palm Leaf/Glass Fiber Reinforced Hybrid Composite” Materials Today: Proceedings, vol. 5, no. 9, pp. 18332-18341, 2018, doi: https://doi.org/10.1016/j.matpr.2018.06.172
    18. 2017
  18. Swain, P. T. R., & Biswas, S., “Influence of fiber surface treatments on physico-mechanical behaviour of jute/epoxy composites impregnated with aluminium oxide filler”, Journal of Composite Materials, vol. 51, no. 28, pp. 3909-3922, 2017, doi: https://doi.org/10.1177/0021998317695420
  19. Swain, P. T. R., & Biswas, S., “Abrasive wear behaviour of surface modified jute fiber reinforced epoxy composites”, Materials Research, vol. 20, pp. 661-674, 2017, doi: https://doi.org/10.1590/1980-5373-MR-2016-0541
  20. Swain, P. T. R., & Biswas, S., “Effect of moisture absorption on the mechanical properties of ceramic filled jute/epoxy hybrid composites”, IOP conference series: materials science and engineering vol. 178, no. 1, pp. 1-9, 2017 doi: 10.1088/1757-899X/178/1/012010
    21. 2014
  21. Swain, P. T. R., & Biswas, S., “Selection of materials using multi criteria decision making method by considering physical and mechanical properties of jute/Al2O3 composites”, Applied Mechanics and Materials, vol. 592, pp. 729-733, 2014, doi: https://doi.org/10.4028/www.scientific.net/AMM.592-594.729
  22. Swain, P. T. R., & Biswas, S., “Physical and mechanical behavior of Al2O3 filled jute fiber reinforced epoxy composites”, International Journal of Current Engineering and Technology, vol. 2, pp. 67-71, 2014, doi: http://dx.doi.org/10.14741/ijcet/spl.2.2014.13.

National Publications

  1. NIL

National Conferences

  1. Priyadarshi Tapas Ranjan Swain and Santosh Kumar Sahu, Application of polymer composite in packaging industry, Recent Advancement in Material Sciences (RAIMS-2022) and 26th Regional Conference of Orissa Chemical Society (OCS-2022) organized by the Veer Surendra Sai University &Technology, Burla, Department of Chemistry during November 18-19th, 2022.
  2. Priyadarshi Tapas Ranjan Swain, Sanghamitra Biswal, COVID-19 Impact, challenges and opportunities on higher education, Two days National conference on impact of post COVID-19 on higher education-challenge and opportunities organized by the Internal Quality Assurance Cell, DRIEMS Autonomous Engineering College from 16-17th April 2021.
  3. Priyadarshi Tapas Ranjan Swain and Lipsa Shubhadarshinee, Effect of hybridization of polymer composite materials, 33rd Annual Conference of Orissa Chemical Society (OCS-2019) and National Seminar on Recent Advancement in Material Sciences (RAIMS-2019) organized by the Veer Surendra Sai University &Technology, Burla, Department of Chemistry during December 24th -25th, 2019.
  4. Santosh Kumar Sahu, Priyadarshi Tapas Ranjan Swain, Chitta Ranjan Deo, Effect of aluminum powder mixed into dielectric fluid on electrical discharge machining of inconel 718, National Conference on Frontiers in Advanced Materials (NCFAM-2019) organized by the Veer Surendra Sai University &Technology, Burla, Department of Physics during July 27-28th, 2019.
  5. Debashish Sahu, Santosh Kumar Sahu, Priyadarshi Tapas Ranjan Swain, Application of Degree Similarity Measures of Fuzzy Sets on Supply Chain Performance Assessment, National Conference on Recent Advances in Production Engineering and Engineering Design (RAPEED-2018), organized by Department of Mechanical Engineering, Ajay Binay Institute of Technology (ABIT), Cuttack (Odisha-753014) during 27th -28th Dec, 2018.

Workshops

  1. WORKSHOP ON MATERIAL PROCESSING, PROCESS METALLURGY AND MATERIAL CHARACTERIZATION (NTPMMPMC-2018). Held at Department of Metallurgy and Materials Engineering, Veer Surendra Sai University & Technology, Burla and 19th March to 23th March 2018.
  2. TEQIP-III Sponsored Workshop on OPTIMIZATION TECHNIQUES AND APPLICATIONS IN MANUFACTURING (OTAM-2019). Held at Department of Production Engineering, Veer Surendra Sai University & Technology, Burla and 15th Jan to 19th Jan 2019.
  3. WORKSHOP ON MATERIAL PROCESSING, PROCESS METALLURGY AND MATERIAL CHARACTERIZATION (NTPMMPMC-2018). Held at Department of Metallurgy and Materials Engineering, Veer Surendra Sai University & Technology, Burla and 19th March to 23th March 2018.
02 Granted, 01 Applied
  1. Kar, J., Rout, A. K., Swain, P. T. R., & Sutar, A. K. (2021). Experimentation with Thermo-mechanically Stable Epoxy Composite Reinforced with Palm Fiber. In Proceedings of International Conference on Thermofluids: KIIT Thermo 2020 (pp. 621-632). Springer Singapore. doi: 10.1007/978-981-15-7831-1_58
  2. N. Ramanujam, Santosh Kumar Sahu, Priyadarshi Tapas Ranjan Swain, Vijaykiran Bura (2022) Smart Manufacturing, RK Publication House, Bagh Karam Baksh, 153, New Railway Rd, Dhan Mohalla, Jalandhar, Punjab 144001. (ISBN No.978-93-95331-07-4).
1. Organised TEQIP-III Sponsored Faculty Development Programme on “Recent Advancement of Materials and it’s Application (RAMA-2020)”, from 15/09/2020 to 19/09/2020 as the Co-coordinator. 2. Organised One-week AICTE ATAL Online Faculty Development Programme on "Novel Materials, Fabrication, Design & Optimization" (NMFDO-2021) from 20/09/2021 to 24/09/2021 as the Co-coordinator.
Assistant Warden of Atri Hall of Residence, Assistant Warden of Agastya Hall of Residence, Programme officer in NSS, Departmental Time Table incharge, FIC Heat Power Engineering Lab FIC Thermal Engineering Lab Faculty Advisor in Idea Innovation Cell Examination Committee Member, VSSUT, Burla during 27th April 2018 to till date

Research Publication

1.      Swain, P. T. R., & Biswas, S., “Physical and mechanical behavior of Al2O3 filled jute fiber reinforced epoxy composites”, International Journal of Current Engineering and Technology, vol. 2, pp. 67-71, 2014, doi: http://dx.doi.org/10.14741/ijcet/spl.2.2014.13.

2. Swain, P. T. R., & Biswas, S., “Selection of materials using multi criteria decision making method by considering physical and mechanical properties of jute/Al2O3 composites”, Applied Mechanics and Materials, vol. 592, pp. 729-733, 2014, doi: https://doi.org/10.4028/www.scientific.net/AMM.592-594.729 IF:0.8 (SCOPUS)

3.       Swain, P. T. R., & Biswas, S., “Effect of moisture absorption on the mechanical properties of ceramic filled jute/epoxy hybrid composites”, IOP conference series: materials science and engineering vol. 178, no. 1, pp. 1-9, 2017 doi: 10.1088/1757-899X/178/1/012010. IF:0.5 (SCOPUS).

4.       Swain, P. T. R., & Biswas, S., “Abrasive wear behaviour of surface modified jute fiber reinforced epoxy composites”, Materials Research, vol. 20, pp. 661-674, 2017, doi:  https://doi.org/10.1590/1980-5373-MR-2016-0541 . IF:1.9 (SCIE).

5.      Swain, P. T. R., & Biswas, S., “Influence of fiber surface treatments on physico-mechanical behaviour of jute/epoxy composites impregnated with aluminium oxide filler”, Journal of Composite Materials, vol. 51, no. 28, pp. 3909-3922, 2017, doi: https://doi.org/10.1177/0021998317695420.  IF:2.5 (SCI).

6.      Swain, P. T. R., Das, S. N., & Jena, S. P., (2018). “Manufacturing and Study of Thermo-Mechanical Behaviour of Surface Modified Date Palm Leaf/Glass Fiber Reinforced Hybrid Composite” Materials Today: Proceedings, vol. 5, no. 9, pp. 18332-18341, 2018, doi: https://doi.org/10.1016/j.matpr.2018.06.172. IF:2.39 (SCOPUS).

7.      Swain, P. T. R., & Biswas, S., “A comparative analysis of physico‐mechanical, water absorption, and morphological behaviour of surface modified woven jute fiber composites”, Polymer Composites, vol. 39, no. 8, pp. 2952-2960, 2018, doi:  https://doi.org/10.1002/pc.24294 .  IF:4.8 (SCI)

8.      Purohit, A., Satapathy, A., Swain, P. T. R., & Patnaik, P. K., “A study on erosion wear behavior of ld sludge reinforced polypropylene composite”, Materials Today: Proceedings, vol. 18, pp. 4299-4304, 2019, doi:  https://doi.org/10.1016/j.matpr.2019.07.388.  IF:2.39 (SCOPUS).

9.      Patnaik, P. K., Swain, P. T. R., & Purohit, A., “Selection of composite materials for structural applications through MCDM approach”, Materials Today: Proceedings, vol. 18, pp. 3454-3461, 2019, doi: https://doi.org/10.1016/j.matpr.2019.07.273 IF:2.39 (SCOPUS).

10.  Patnaik, P. K., Swain, P. T. R., & Biswas, S., “Investigation of mechanical and abrasive wear behavior of blast furnace slag‐filled needle‐punched nonwoven viscose fabric epoxy hybrid composites”, Polymer Composites, vol.  40, no. 6, pp. 2335-2345, 2019, doi:  https://doi.org/10.1002/pc.25090

11.  Patnaik, P. K., Swain, P. T. R., Mishra, S. K., Purohit, A., & Biswas, S., “Recent developments on characterization of needle-punched nonwoven fabric reinforced polymer composites–A review”, Materials Today: Proceedings, vol. 26, pp. 466-470, 2020, doi: https://doi.org/10.1016/j.matpr.2019.12.086 IF:2.39 (SCOPUS).

12.  Swain, P. T. R., Das, S. N., Patnaik, P. K., & Purohit, A., “The influence of moisture absorption on the mechanical and thermal properties of chemically treated DPL reinforced hybrid composite”, Materials Science Forum, vol. 978, pp. 316-322, 2020, doi:  https://doi.org/10.4028/www.scientific.net/MSF.978.316 IF:0.5 (SCOPUS)

13.  Purohit, A., Satapathy, A., & Swain, P. T. R., “Analysis of Erosion Wear Behavior of LD Sludge Filled Polypropylene Composites Using RSM”, Materials Science Forum, vol. 978, pp. 222-228, 2020, doi:  https://doi.org/10.4028/www.scientific.net/MSF.978.222 IF:0.5 (SCOPUS)

14.  Purohit, A., Swain, P. T. R., & Patnaik, P. K., “Mechanical and sliding wear characterization of LD sludge filled hybrid composites”, Materials today: proceedings, vol. 26, pp. 1654-1659, 2020, doi:  https://doi.org/10.1016/j.matpr.2020.02.345 IF:2.39 (SCOPUS).

15.  Purohit, A., Satapathy, A., Swain, P. T. R., & Patnaik, P. K., “Analysis of sliding wear behavior of LD sludge filled epoxy composites using response surface methodology”, Materials Today: Proceedings, vol. 33, pp. 5066-5069, 2020, doi:  https://doi.org/10.1016/j.matpr.2020.02.845 IF:2.39 (SCOPUS).

16.  Patnaik, P. K., Swain, P. T. R., Mishra, S. K., Purohit, A., & Biswas, S., “Composite material selection for structural applications based on AHP-MOORA approach”, Materials Today: Proceedings, vol. 33, pp. 5659-5663, 2020, doi:  https://doi.org/10.1016/j.matpr.2020.04.063 IF:2.39 (SCOPUS).

17.  Patnaik, P. K., Mishra, S. K., & Swain, P. T. R., “Erosion wear behavior of needle-punched nonwoven fabric (NPNF) reinforced epoxy composites–An evaluation using Taguchi’s design”, Materials Today: Proceedings, vol. 33, pp. 5683-5686, 2020, doi: https://doi.org/10.1016/j.matpr.2020.04.208 IF:2.39 (SCOPUS).

18.  Patnaik, P. K., Swain, P. T. R., Purohit, A., & Biswas, S.,  “Tribological study on slurry abrasive wear behavior of nonwoven viscose fabric composites with doe approach”, Surface Review and Letters, vol. 27, no. 08, pp. 1950185, 2020, doi:  https://doi.org/10.1142/S0218625X19501853. IF:1.15 (SCIE)

19.  Patnaik, P. K., Mishra, S. K., Swain, P. T. R., & Panda, D., “Effect of Groundnut Shell Particulate Content on Physical and Mechanical Behavior of Jute–Epoxy Hybrid Composite”, Journal of The Institution of Engineers (India): Series E, pp. 1-8, 2020, doi: 10.1007/s40034-020-00185-y. IF:1.36 (SCOPUS)

20.  Patnaik, P. K., Mishra, S. K., Swain, P. T. R., Purohit, A., Parija, S. K., & Panda, S. S.,  “Multi-objective optimization and experimental analysis of electro-discharge machining parameters via Gray-Taguchi, TOPSIS-Taguchi and PSI-Taguchi methods”, Materials Today: Proceedings, vol. 62, pp. 6189-6198, 2022, doi:  https://doi.org/10.1016/j.matpr.2022.05.087 IF:2.39 (SCOPUS).

21.  Rout, L. N., Mishra, D., & Swain, P. T. R., (2022). “Influence of Silicon Carbide (SiC) Reinforcement on Sliding and Erosive Wear Characteristics of Glass Fiber/Epoxy Hybrid Composites”, Transactions of the Indian Institute of Metals, pp. 1-9, 2022, doi:  https://doi.org/10.1007/s12666-022-02828-7 . IF:1.5 (SCIE)

22.  Purohit, A., Tripathy, V., Mishra, S. K., Swain, P. T. R., & Patnaik, P. K., “Mechanical and Tribo-performance Analysis of Linz Donawitz Sludge-Filled Glass–Epoxy Composites using Taguchi Experimental Design”, Journal of The Institution of Engineers (India): Series E, vol. 103, no. 2, pp. 245-251, 2022, doi:  https://doi.org/10.1007/s40034-021-00236-y . IF:1.36 (SCOPUS)

23.  Rout, L. N., Mishra, D., & Swain, P. T. R., (2023). “Physical, Thermal, and Mechanical Characterization of Ceramic (SiC) Filled Woven Glass Fiber Reinforced Hybrid Polymer Composites”, Silicon, pp. 1-11, 2023, https://link.springer.com/article/10.1007/s12633-023-02792-x . IF:2.6 (SCIE)

 

CONFERENCES

 

1.       Debashish Sahu, Santosh Kumar Sahu, Priyadarshi Tapas Ranjan Swain, Application of Degree Similarity Measures of Fuzzy Sets on Supply Chain Performance Assessment, National Conference on Recent Advances in Production Engineering and Engineering Design (RAPEED-2018), organized by Department of Mechanical Engineering, Ajay Binay Institute of Technology (ABIT), Cuttack (Odisha-753014) during 27th -28th Dec, 2018.

2.       Santosh Kumar Sahu, Priyadarshi Tapas Ranjan Swain, Chitta Ranjan Deo, Effect of aluminum powder mixed into dielectric fluid on electrical discharge machining of inconel 718, National Conference on Frontiers in Advanced Materials (NCFAM-2019) organized by the Veer Surendra Sai University &Technology, Burla, Department of Physics during July 27-28th, 2019.

3.       Priyadarshi Tapas Ranjan Swain and Lipsa Shubhadarshinee, Effect of hybridization of polymer composite materials, 33rd Annual  Conference of Orissa Chemical Society (OCS-2019) and National Seminar on  Recent Advancement in Material Sciences (RAIMS-2019) organized by the Veer Surendra Sai University &Technology, Burla, Department of Chemistry during December 24th -25th, 2019.

4.       Priyadarshi Tapas Ranjan Swain, Sanghamitra Biswal, COVID-19 Impact, challenges and opportunities on higher education, Two days National conference on impact of post COVID-19 on higher education-challenge and opportunities organized by the Internal Quality Assurance Cell, DRIEMS Autonomous Engineering College from 16-17th April 2021.

5.       Priyadarshi Tapas Ranjan Swain and Santosh Kumar Sahu, Application of polymer composite in packaging industry, Recent Advancement in Material Sciences (RAIMS-2022) and 26th Regional Conference of Orissa Chemical Society (OCS-2022) organized by the Veer Surendra Sai University &Technology, Burla, Department of Chemistry during November 18-19th, 2022.

 

  

     WORKSHOP, SHORT TERMCOURSE AND FACULTY DEVELOPMENT PROGRAMME

1.      A Short-Term Course on COMPOSITE: MANUFACTURING, MACHINING, MODELING AND OPTIMIZATION (CMMMO-2018). Held at Department of Production Engineering, Veer Surendra Sai University &Technology, Burla and19th Feb to 24th Feb 2018.

2.      A Short-Term Course on NUMERICAL MODELING OF HEAT TRANSFER AND FLUID FLOW USING Open FOAM. (NMHTFLOU Open FORM-2018) Held at Department of Mechanical Engineering, Veer Surendra Sai University &Technology, Burla and 26th March to 31st March 2018.

3.      A Short-Term Course on ENGINEERING MATERIALS, DESIGN & APPLICATIONS (EDMA-2018). Held at Department of Mechanical Engineering, Veer Surendra Sai University & Technology, Burla and 23rd April to 28th April 2018.

4.      A Short-Term Course on RECENT ADVANCES IN MACHINING PROCESSES (RAMP-2018). Held at Department of Production Engineering, Veer Surendra Sai University &Technology, Burla and 07th  May to12th  May 2018.

5.      Workshop on Optimization Techniques and Application In Manufacturing (OTAM-2019) organised by VSSUT, Burla from 15/01/2019 to 19/01/2019

6.      Workshop on Large Scale Dependent Materials Behavior (LSDMB-2019) organised by VSSUT, Burla from10/02/2019 to14/02/2019.

7.      One Week STTP on Application of Optimization Technique on Advanced Manufacturing Processes organised by VSSUT, Burla from 25/03/2019 to 30/03/2019.

8.      One Week STTP on Advanced Research Methodology organised by REST Society for Research International from 11/05/2020 to 15/05/2020.

9.      One Week FDP – IIT (Inevitable Ingenious Technologies) Webinar Series organised by Sri Venkateshwaraa College of Engineering & Technology, Puducherry from 18/05/2020 to 23/05/2020.

10.  One Week FDP on Moodle learning management system organised by Government college of Engineering Kalahandi in associated with spoken tutorial project, IIT Bombay from 25/05/2020 to 30/05/2020.

11.  One Week FDP on Advance Manufacturing Enterprise in Digital Era organised by Aditya Institute of Technology and Management from 01/06/2020 to 05/06/2020.

12.  One Week FDP on Advances in Materials for Engineering Applications organised by Vignan’s Institute of Engineering for Women from 06/06/2020 to 10/06/2020.

13.  One-week STTP on Environmental crisis and sustainable development organised by NIT, Kurukshetra and Govt. Engineering College Bikaner from 01/07/2020 to 05/07/2020.

14.  One-week STTP on Hybrid Manufacturing Process: opportunities and challenges organised by Dr B R Ambedkar National Institute of Technology, Jalandhar from 06/07/2020 to 10/07/2020.

15.  One-week STTP on Industry 4.O and smart manufacturing: Opportunities and challenges organised by Dr B R Ambedkar National Institute of Technology, Jalandhar from 20/07/2020 to 24/07/2020.

16.  One-week STTP on Reliability, Maintainability and Quality issues in Process Industries organised by Dr B R Ambedkar National Institute of Technology, Jalandhar from 04/08/2020 to 08/08/2020.

17.  One Week FDP on Trends in Industrial and Mechanical Engineering organised by Raghu Engineering College from 17/08/2020 to 21/08/2020.

18.  One Week FDP on Modeling, Simulation, and Experimental Approaches of Mechanical Systems organised by Government College of Engineering, Kalahandi from 24/08/2020 to 28/08/2020.

19.  One-week STTP on Researches in Surface Engineering for Reliable Tribology organised by GIMT, Guwahati from 01/09/2020 to 05/09/2020.

20.  One Week FDP on Advances in Materials & Machining Processes for Recent Industrial Applications organised by VSSUT, Burla from 07/09/2020 to 11/09/2020.

21.  One Week FDP on Data Sciences organised by  AICTE Training And Learning (ATAL) Academy from 16/11/2020 to 20/11/2020.

22.  One Week FDP on Advance of Materials Design, Machining and Characterization (AMDMC-2020) organised by VSSUT, Burla from 21/11/2020 to 26/11/2020.

23.  One Week FDP on Waste Technology organised by AICTE Training and Learning (ATAL) Academy from 21/12/2020 to 25/12/2020.

24.  One Week STTP-Phase-III on Innovations and Challenges in Industry 4.0 Automation and Smart Manufacturing organised by Department of Mechanical Engineering, Kallam  Haranadha Reddy Institute of Technology,  Guntur, Andhra Pradesh  from 26/07/2021 to 31/07/2021.

25.  One Week FDP on Additive Manufacturing process and its applications organised by Department of Mechanical Engineering, Sri Manakula Vinayagar Engineering College, Puducherry from 23/08/2021 to 28/08/2021.

26.  One Week FDP on Thin Film in Manufacturing (TFM-2021) organised by Department of Mechanical Engineering & Industry Institute Interaction cell, Madanapalle Institute of Technology & Science, Madanapalle from 04/10/2021 to 08/10/2021.

One Week online elementary FDP on Artificial Intelligence and Machine Learning Organised by VSSUT during 22/11/2021 to 26/11/2021.
One Week online elementary FDP on Processing and Applications of Functionally Graded Composite Materials Organised by Thiagarajar College of Engineering during 06/12/2021 to 10/12/2021.
One Week online elementary FDP on Recent Advancement in Manufacturing Processing Organised by VSSUT during 27/12/2021 to 31/12/2021.
One Week online elementary FDP on Nanostructured Materials and Their Applications Organised by National Institute of Technology, Manipur during 7/2/2022 to 11/2/2022.

31.  One Week FDP on Progressive trends in mechanical engineering and allied fields organised by Center of excellence of FMS/Robotic design with Mechanical engineering department, G H Raisoni college of engineering, Nagpur from 28/06/2022 to 02/07/2022.

32.  One Week FDP on Energy managements in power plants organised by Department of Mechanical engineering, school of engineering, OPJU from 05/09/2022 to 09/09/2022.

33.  One Week FDP on Trends & challenges in the development of electric vehicles and hybrid electric vehicles (series-1) organised by Department of Mechanical engineering, Lendi institute of engineering and technology, Vizianagaram, Andhra Pradesh from 26/09/2022 to 30/09/2022.

34.  One Week FDP on Trends & challenges in the development of electric vehicles and hybrid electric vehicles (series-2) organised by Department of Mechanical engineering, Lendi institute of engineering and technology, Vizianagaram, Andhra Pradesh from 14/11/2022 to 18/11/2022.

35.  One Week FDP on Pedagogy organised by Center for distance and continuing education, VSSUT , Burla from 23/11/2022 to 29/11/2022.

36.  Two-week STC on Materials, Manufacturing & Management (MMM-2018) organised by VSSUT, Burla from 14/05/2018 to 26/05/2018.

37.  Two-week STC on Functional Engineering Material Technology, Modeling and Analysis -2018 organised by VSSUT, Burla from 25/06/2018 to 07/07/2018.

38.  Two weeks online STC on Recent Trends in Mechanical Engineering (RTME-2021) organised by   IGIT, Sarang from 01/02/2021 to 12/02/2021.

39.  Two weeks online FDP on Recent advances in materials and challenges in manufacturing techniques organised by department of mechanical engineering, university college of engineering kakinada from 07/02/2021 to 19/02/2021.

40.  Two weeks online FDP on Novel Prospective of smart materials, hybrid machining and additive manufacturing (NPSHAM-2021) organised by department of mechanical engineering, Inderprastha engineering college, Ghaziabad from 26/07/2021 to 10/08/2021.

41.  One Week FDP on Recent Advancement in Heat Exchanger Technologies: Experimentation and Simulations organised by department of mechanical engineering, School of engineering, OP Jindal University, Raigarh, from 13/03/2023 to 17/03/2023.

42.  One Week FDP on Advancements in Mechanical Engineering organised by department of mechanical engineering, Lakireddy Bali Reddy college of engineering, Mylavaram, Krishna (Dt.), Andhra Pradesh, India from 19/06/2023 to 24/06/2023.

43.  One-week STTP on Sustainable Energy Technology for Hydrogen, Solar, Wind and Biomass Energy at G H Raisoni College of Engineering, Nagpur by Center of Excellence in Energy, department of mechanical engineering in association with Sustainability Solution Pune and AICTE IDEA lab from 04/07/2023 to 08/07/2023.

44.  One Week National Workshop on 3D Printing: stage of art and future prospects (3DP-2023) organised by department of mechanical engineering, NIT, Rourkela from 15/07/2023 to 19/07/2023.

45.  3 Days Face to Face FDP on Inculcating Universal Human Values in Technical Education at Veer Surendra Sai University of Technology, Sambalpur organised by AICTE from 8/9/2023 to 10/09/2023.

46.  One Week FDP on Novel Materials & its Engineering Applications at SIKSHA 'O' ANUSANDHAN University organised by AICTE Training and Learning (ATAL) Academy from 18/12/2023 to 23/12/2023.

47.  One Week FDP on Sustainable Manufacturing & Industry 4.0: Special emphasis on 3D printing  &  microwave  material  processing  (SMI  4.0) organized  by  the  Department  of Mechanical  Engineering,  National  Institute  of  Technology  Rourkela,  Odisha-769008 from 1/7/2024 to 5/7/2024.

 

PARTICIPATED IN QUIZ:

National Level Quiz on NAAC, Organized by the Department of Computer Engineering, Padmabhushan Vasantdada Patil Pratishthan’s College of Engineering, Mumbai-22 on 31.05.2020.

National level E- Quiz on Entrepreneurship Development and Innovation organized by Vaagdevi Institute of Technology and Science, Proddatur on 27.05.2020.

National level E- Quiz on Research Methodology Organiged by NRI Institute of Technology, Agirpally on 24.06.2020.

 

INVITED LECTURES:

1.      Participated as Speaker and Resource Person for Advances in Mechanical Engineering Organised by Department of Mechanical Engineering, SIET, Bhubaneswar during 11th – 15th Feb., 2020.

2.      Participated as Speaker and Resource Person for Advances in composite Materials and Manufacturing Process Organised by Department of Mechanical Engineering, St. Ann's College of Engineering and Technology, Chirala during 22nd –  26th June, 2020.

3.      Participated as Speaker and Resource Person for Recent Advancements in Manufacturing and Materials Processing Organised by Department of Mechanical Engineering, VSSUT, Burla during 10th -14th September, 2020.

4.      Participated as Speaker and Resource Person for Recent Advancements of Materials and its Application Organised by Department of Mechanical Engineering,  VSSUT, Burla during 15th -19th September, 2020.

5.      Participated as Speaker and Resource Person for Design, Simulation, Development and characterization of composites with advanced techniques Organised by Department of Mechanical Engineering, GIET University during 30th Nov -5th Dec, 2020.

6.      Participated as Speaker and Resource Person for ATAL online elementary FDP on Novel Materials, Fabrication Design and Optimization Organised by VSSUT during 20th Sept -24th Sept, 2021.

7.      Participated as Speaker and Resource Person for SOA Weekly Academic Lecture Organised by Department of Mechanical Engineering, SOA University during 6th Nov, 2021.

8.      Participated as Speaker and Resource Person for Emerging Technological Advancement (ETA-2021) Organised by Department of Mechanical Engineering, DRIEMS Autonomous Engineering College during 20th Dec -27th Dec, 2021.

9.      Participated as Speaker and Resource Person for Charectrization of smart materials Organised by Department of Mechanical Engineering, Konark Institute of Science and Technology during 24th Sept., 2022.

10.  Participated as Speaker and Resource Person for SOA Weekly Academic Lecture Organised by Department of Mechanical Engineering, SOA University during 15th October, 2022.

11.  Participated as Speaker and Resource Person for training programme on Farm mechanization for self-employment under skill training for  rural youth sponsor by ATMA, Bargarh during 1st Nov -7th Nov, 2022.

 

Book Chapter:

 

1. Kar, J., Rout, A. K., Swain, P. T. R., & Sutar, A. K. (2021). Experimentation with Thermo-mechanically Stable Epoxy Composite Reinforced with Palm Fiber. In Proceedings of International Conference on Thermo-fluids: KIIT Thermo 2020 (pp. 621-632). Springer Singapore. doi: 10.1007/978-981-15-7831-1_58  

Patent:

1. Portable Plastic Recycling Machine with Fast Crushing Unit (2024), Application Number: 350380-001, Intellectual Property India. (Awarded)

2. Intelligent Mobile Charger: Automatic Disconnect the Charger If Your Mobile Battery Charge 97.5%. (2021), Application Number: 202141021762, Intellectual Property India. (Published)

3. AI-IOT Based Cylinder Trolley System and Thereof (2024), Application No 2023/07522 Accepted on 31/01/2024. CIPC Intellectual Property, Republic of South Africa. (Awarded)

 

Award:

1. Distinguished Young Scientist National AWARD-2021 awarded by International Institute of Organized Research I2OR Award for remarkable contribution in the field research.
 
Present Address : 
Mr. Priyadarshi Tapas Ranjan Swain Assistant Professor Department of Mechanical Engineering Veer Surendra Sai University of Technology, Burla Sambalpur-768018, Orissa, INDIA Contact Number : +919439000025 		  Permanent Address : 
S/O: Mr. Pitabas Swain and Mrs. Basanti Swain At/Po: Santhapur Via: Gondia PS:Gondia Dist: Dhenkanal Pin: 759016 Odisha, INDIA Contact Number : +919439000025

Quick Links

PG/Ph.D. Admissions

Faculty Recruitment

e-Grievance Redressal