65 Years of Excellence

Metallurgical & Materials Engineering

Name : Dr. Dinesh Kumar Mishra
Designation : Assistant Professor
Phone No. : +91-8763457107
Email Id : dinesh.vssut@gmail.com, dinesh.igit@gmail.com
Date of Joining : 07-06-2014

B.Tech (I.G.I.T., Sarang), M.Tech (IIT, Kharagpur), Ph.D. (VSSUT, Burla)

Metallurgical and Materials Engineering

  1. June 2014 – Present, Assistant Professor, Department of Metallurgical& Materials Engineering, Veer Surendra Sai University of Technology (VSSUT), Burla, Sambalpur, Odisha, India.
  2. July 2013 – Oct 2013, Assistant Professor, Department of Metallurgical & Materials Engineering, GIET, Gunupur, Rayagada, Odisha, India.

Graduate Level :
  1. Metallurgical Thermodynamics & Kinetics
  2. Deformation Theory of Metals
  3. Mineral Processing
  4. Testing of Materials
  5. Failure Analysis
  6. Iron making
  7. X-Ray Diffraction
  8. Steel making
  9. Transport Phenomena
  10. Alternative Routes of Iron Making
Post Graduate Level :
  1. Advanced Concept in Iron Making
  2. Advanced Thermodynamics & Kinetics of Materials

  1. Computational Modeling & Simulation
  2. High Entropy Alloy
  3. Nanoindentation
  4. Powder Metallurgy
  5. Mechanical Alloying
  6. Process Metallurgy
  7. Iron & Steel - Heat Treatment & Characterization

Ph. D. Candidates : NIL
M. Tech. Candidates : NIL
  1. Awarded for Best Poster presentation in the workshop on Monitoring of Research of Ph.D Scholars (MRS-2017) during March 17-18, 2017 at VSSUT, Burla.
  1. Life member in “The Indian Institute of Metals” – [AO2-LM-55725]
  2. Life member in “Society for Failure Analysis” – [FLM-SFA-0591]
  3. Life Associate member in “The Institution of Engineers (India)” - [AM170967-7]
DATA TO BE UPDATED...

International Publications

  1. Saroj Kumar Sahu, Dinesh Kumar Mishra, AjitBehera and R. P. Dalai “An overview on the effect of heat-treatment and cooling rates on Ni-based super-alloys.” Materials Today: Proceedings[Accepted]
  2. G. M. Naik, B. N. Anjan, R. I. Badiger, Sadashiv Bellubbi, and Dinesh Kumar Mishra “An investigation on effects of wire-EDT machining parameters on surface roughness of INCONEL 718.” Materials Today: Proceedings 35 (2021): 474-477.
  3. R. P. Dalai, S. Nath, Dinesh Kumar Mishra, and G. Behera “Fabrication of an Al matrix hybrid composite reinforced with Cu, Al2O3 and TiC by mechanical alloying.” Materials Today: Proceedings 26(2020): 1841-1844.
  4. BishnupriyaBehera, Dinesh Kumar Mishra, S. K. BadJenaand R. P. Dalai “Development and Characterization of Al2O3 and SiC reinforced Al-Cu Metal Matrix Hybrid Composites.” Materials Science Forum 978, ISSN: 1662-9752 (2019): 202-208.
  5. Dinesh Kumar Mishra, Md. Meraj,S. K. BadJenaand Snehanshu Pal “Structural evolution and dislocation behaviour study during nanoindentation of Mo20W20Co20Ta20Zr20 high entropy alloy coated Ni single crystal using molecular dynamic simulation.” Molecular Simulation 45, no.7 (2019): 572-584.
  6. Dinesh Kumar Mishra, Md. Meraj,S. K. BadJenaand Snehanshu Pal “Dislocation Interaction and V-Shaped Growth of the Distorted Structure During Nanoindentation of Cu 20 Ni 20 Al 20 Co 20 Fe 20 (high-entropy alloy)-Coated Copper: A Molecular Dynamics Simulation-Based Study.” Transactions of the Indian Institute of Metals72, no.1 (2019): 167-180.
  7. Shubhank Gupta, Aditi Panda, RuchiraNaskar, Dinesh Kumar Mishra and Snehanshu Pal “Processing and refinement of steel microstructure images for assisting in computerized heat treatment of plain carbon steel.” Journal of Electronic Imaging 26, no. 6 (2017): 063010.
  8. Prince Kumar Singh, Prvan Kumar Katiyar, A. Lava Kumar, Dinesh Kumar Mishra, and Ajit Behera. "Agglomeration behavior of solid waste materials in steel plants." Emerging Materials Research 5, no. 1 (2016): 171-176.

Conferences

  1. Saroj Kumar Sahu, Dinesh Kumar Mishra, AjitBehera and R. P. Dalai “An overview on the effect of heat-treatment and cooling rates on Ni-based super-alloys.” [Presented in online conference on ICAMEN-2021, 18th-19th March, 2021, Jointly organized by Manipal University Jaipur andNIT Uttarakhand]
  2. Dinesh Kumar Mishra, S. K. BadJena, and Snehanshu Pal “A Comparative Nanoindentation Study on HEA Coated FCC Metals and Stacking Fault Tetrahedra Evolution in HEA Coated Single Crystal Al: A MD Simulation Study” [Presented in International online conference on CPCM-2020, 18th-20th December, 2020, NIT Rourkela]
  3. Dinesh Kumar Mishra, and RenuPrava Dalai “Synthesis and Characterization of Al-Fly ash Composite via Powder Metallurgy Method” [Presented in International online conference on ESMAC-2020 10th – 12th August, 2020, KIIT, Bhubaneswar]
  4. RenuPrava Dalai, SuchismitaNath, Dinesh Kumar Mishra, and GaurhariBehera “Fabrication of an Al matrix hybrid composite reinforced with Cu, Al2O3 and TiC by mechanical alloying” [Presented in International conference on Materials Processing and Characterization 21st -23rd February, 2020, GLA University Mathura]
  5. ArpitaPriyadarshaniSamal, Dinesh Kumar Mishra, and RenuPrava Dalai “Synthesis and Characterization of Al-SiC-FlyAsh Nanocomposites via Powder Metallurgy Route to Study the Effect of Fly Ash and Sintering Temperature on final Microstructure and Mechanical Properties” [Presented in International conference on INALT 2020, 8th-9th February, 2020, NALCO, Angul]
  6. SuchismitaNath, RenuPrava Dalai, and Dinesh Kumar Mishra“Microstructure and mechanical properties between Al-Cu-TiC and Al-Cu-SiC metal matrix composite by powder metallurgy route” [Presented in International conference on INALT 2020, 8th-9thFebruary, 2020, NALCO, Angul]
  7. Dinesh Kumar Mishra, RenuPrava Dalai, ArpitaPriyadarshaniSamal, and Binay Kumar Mahanta “Effect of Sintering Temperature and Reinforcement Composition on Microstructure and Mechanical Properties of Al-SiC-Fly Ash Hybrid Composite using Powder Metallurgy Route” [Presented in International conference on ICASPCT-2019, 21st-22nd November, 2019, OPJIT, Raigarh]
  8. SuchismitaNath,Dinesh Kumar Mishra, andRenuPrava Dalai “Development of Al-Cu Matrix Composites Reinforced with Al2O3, SiC and TiC by Mechanical Alloying” [Presented in International conference on ICASPCT-2019, 21st-22nd November, 2019, OPJIT, Raigarh]
  9. Dinesh Kumar Mishra, GaurhariBehera, Suprava Patel and Swapnashree Das “Effect of Varying TiC% on Microstructure and Mechanical Properties of Al-SiC-TiC Hybrid Composite” [Presented in National conference on NMD ATM 2019, 13th – 16th November 2019, Hotels UdaySamudra&Samudra, Kovalam, Trivandrum]
  10. Dinesh Kumar Mishra, S. K. BadJena, and Snehanshu Pal “Study the Effect of Dislocation Evolution on Deformation Behavior of HEA Coated Single Crystal Ni under different Loading Velocity during Nanoindentation using Molecular Dynamics Simulation” [Presented in International conference on SCAN-2019, 1st-2nd November 2019, Hotel Novotel, Kolkata]
  11. Dinesh Kumar Mishra, MaheswarRath, GaurhariBehera, S. K. BadJena, and Anisha Agarwal “Effect of Varying TiO2% on Microstructure and Mechanical Properties of Al-SiC-TiO2 Hybrid Composite” [Presented in National conference on BTTD-2019, 5th-6th September 2019, CSIR-NML, Jamshedpur] [Awarded as 2nd Best Oral Presentation]
  12. Dinesh Kumar Mishra, Aiswarya Kumar Sahoo, and BadrinathKar “A Review on Current Progress in High Entropy Alloys” [Presented in National conference on BTTD-2019, 5th-6th September 2019, CSIR-NML, Jamshedpur]
  13. ArpitaPriyadarshaniSamal, and Dinesh Kumar Mishra “A Study On Processing Of Elemental Titanium Using Powder Metallurgy Route” [Presented in National conference on NCFAM-2019, 27th-28th July 2019, VSSUT, Burla]
  14. Manisha Kar, NainaNickytashaBaral, S. K. BadJena, GourhariBehera, Dinesh Kumar Mishra “Fabrication and Characterization of Al-SiC-TiO2 Hybrid Metal Matrix Composite using Powder Metallurgy Route.” [Presented in National conference on Innovative Structural Materials, 24th – 25th December 2018, Advanced Engineering Research Foundation (AEMRF), Bhubaneswar]
  15. BishnupriyaBehera, Dinesh Kumar Mishra, S. K. BadJenaand R. P. Dalai “Synthesis and Characterization of Al2O3 and SiC reinforced Al-Cu Metal Matrix Hybrid Composites.” [Presented in International conference on ICPCM-2018, 6th – 8th December 2018, NIT Rourkela] [Proceeding available]
  16. Dinesh Kumar Mishra, Md. Meraj,S. K. BadJenaand Snehanshu Pal “Effect of Work Hardening Behavior on Growth of Defect Structure under Nanoindentation of Cu20Ni20Al20Co20Fe20 (HEA) coated Copper: A Molecular Dynamics Study.” [Presented in National conference on NMD ATM 2018, 14th – 16th November 2018, J. W. Marriott, Kolkata]
  17. Dinesh Kumar Mishra, Prayag Agrawal, Amit Kumar Mishra, Nirmal Chandra Das, and Subhadra Sahoo “Study on Microstructure and Mechanical Properties of Welded Dual Phase Steel and Medium Carbon Steel Joint by TIG Welding” [Presented in National conference on BTTD-2018, 5th-6th July 2018, CSIR-NML, Jamshedpur]
  18. Dinesh Kumar Mishra, Nitish Jojo, Swagatika Mishra, and Subhadra Sahoo “Sintering Behavior of Al2O3-SiO2 based mortar under the variation of different binders” [Presented in National conference on BTTD-2017, 22nd-23rd April 2017, CSIR-NML, Jamshedpur]
  19. Subhadra Sahoo, Nirmal Chandra Das, Mojesh Samuel Sukdulary and Dinesh Kumar Mishra “Corrosion behavior of AISI 304 SS Alloy in different solution” [Presented in National conference on BTTD-2017, 22nd-23rd April 2017, CSIR-NML, Jamshedpur]
  20. Dinesh Kumar Mishra, S. K. BadJena and Snehanshu Pal “Study of High Entropy Alloy using Mechanical Alloying Route” [Presented in MRS-2017, 17th – 18th Mar 2017, VSSUT, Burla] – Awarded for Best Poster Presentation
  21. Nirmal Chandra Das, Anubhav Mahapatra, Dinesh Kumar Mishra and  R.P Dalai “Effect of sintering temperature and reinforcement content on the properties of Al/Fly ash composite” [Presented in National conference on NMD ATM 2016, 11th – 14th November 2016, IIT Kanpur]
  22. Chinmayee Pati, Akanshya Rout, Dinesh Kumar Mishra and Snehanshu Pal “Effect of casting speed and specific heat on metallurgical length of continuous casting of different kinds of steel” [Presented in National conference on NMD ATM 2016, 11th – 14th November 2016, IIT Kanpur]
  23. Shradha Nayak, Md. Meraj, Dinesh Kumar Mishra and Snehanshu Pal “Effect of void in crack propagation in Nickel thin film” [Presented in National conference on NMD ATM 2016, 11th – 14th November 2016, IIT Kanpur]
  24. Nilakantha Sahu, Subhadra Sahoo and Dinesh Kumar Mishra “Heat Affected Zone Simulation of Nitronic steel using Rykalin 3D method for HAZ Simulation” [Presented in National conference on NMD ATM 2016, 11th – 14th November 2016, IIT Kanpur]
  25. Subhadra Sahoo, Amit Sarkar, Nilakantha Sahu and Dinesh Kumar Mishra “Corrosion Behaviour of Austenitic Stainless Steel in Different Temperature, and pH” [Presented in International conference on ICAMMP-iv 2016, 05th – 07th November 2016, IIT Kharagpur]
  26. Arati Biswal, Nitish Jojo, Dinesh Kumar Mishra and R.P. Dalai “Fabrication and characterization of the Fly ash reinforced aluminium matrix composite” [Presented in International conference on ICAMMP-iv 2016, 05th – 07th November 2016, IIT Kharagpur]
  27. Amit Kumar Mishra, Nitish Jojo, Subhadra Sahoo, and Dinesh Kumar Mishra “A Study on Production of Stainless Steel Through AOD Converter by the use of Dynamic Process Modelling” [Presented in National conference on Advanced Engineering Materials, 2016, 23rd – 24th July 2016, GIET, Gunupur]
  28. Anubhav Mahapatra, Nirmal Chandra Das, Subhadra Sahoo, and Dinesh Kumar Mishra “A Review on Graphene - Reinforced Aluminium Metal Matrix Composite Prepared by Spark Plasma Sintering Process” [Presented in National conference on Advanced Engineering Materials, 2016, 23rd – 24th July 2016, GIET, Gunupur]
  29. Dinesh Kumar Mishra, Shradha Nayak, Chinmayee Pati and Subhadra Sahoo “Impact of Superheat on Continuous Casting of Steel” [Presented in National conference on BTTD-2016, 09th-10th June 2016, CSIR-NML, Jamshedpur]
  30. Amit Mishra, Dinesh Kumar Mishra and Subhadra Sahoo “Estimation of Ductile Tearing Resistance of DP590 Steel by Essential work of Fracture Method” [Presented in National conference on BTTD-2016, 09th-10th June 2016, CSIR-NML, Jamshedpur]
  31. Sasmita Rath, Suraj Kumar Panda and Dinesh Kumar Mishra “A Review on Graphene based Nano Composites” [Presented in National conference on NCPCM-2015, 12th-13th December 2015, NIT, Rourkela]
  32. Shreehard Sahu and Dinesh Kumar Mishra “A Study on High Entropy Alloys for Aero Engines” [Presented in National conference on NCPCM-2015, 12th-13th December 2015, NIT, Rourkela]
  33. Chinmayee Pati and Dinesh Kumar Mishra “Study of Extraction of Non-Ferrous Metals from Discarded Printed Circuit Boards (PCBS)” [Presented in National conference on NCPCM-2015, 12th-13th December 2015, NIT, Rourkela]
  34. Manorama Pradhan, Archana Mishra and Dinesh Kumar Mishra “Study of Super Plasticity in Nano Materials” [Presented in National conference on NCPCM-2015, 12th-13th December 2015, NIT, Rourkela]
  35. Subhadra Sahoo, Padmapriya N., Partha Sarathi De, Dinesh Kumar Mishra, P. C. Chakraborti and S. K. Ray “EWF Testing of Automotive Grade DP 590 Steel Sheets” [Presented in National conference on NMD ATM 2015, 13th – 16th November 2015, IIM Coimbatore]
  36. Sasmita Rath, Dinesh Kumar Mishra and S. K. BadJena “A study on Manufacturing of Ceramic Tiles using Fly Ash” [Presented in National conference on BTTD-2015, 09th-10th April 2015, CSIR-NML, Jamshedpur]
  37. Sidharth Patra, Dinesh Kumar Mishra and S. K. BadJena “A Study on Inclusion Control during Continuous Casting” [Presented in National conference on BTTD-2015, 09th-10th April 2015, CSIR-NML, Jamshedpur]
  38. Dinesh Kumar Mishra, Saraswat Mishra, Abinash Jena, NitishJojo, and Subhadra Sahoo “Study of Welding of Austenitic Stainless Steel Type 304” [Presented in National conference on BTTD-2018, 5th-6th July 2018, CSIR-NML, Jamshedpur]
  39. Swastika Tripathy, A. Lava Kumar, Dinesh Kumar Mishra and S. K. BadJena “A Review on Ancient Advanced Material: Wootz Steel” [Presented in National conference on BTTD-2015, 09th-10th April 2015, CSIR-NML, Jamshedpur]
  40. Dinesh Kumar Mishra and A. Lava Kumar “Modelling of Iron Ore Pelletization” [Presented in International conference on ICASPCT-2015, 14th-16th January 2015, OPJIT, Raigarh]
  1. Dinesh Kumar Mishra, S. K. BadJena, and Snehanshu Pal “A Comparative Nanoindentation Study on HEA Coated FCC Metals and Stacking Fault Tetrahedra Evolution in HEA Coated Single Crystal Al: A MD Simulation Study” Book Chapter in “Processing and Characterization of Materials(Select Proceedings of CPCM 2020)”, Springer Proceedings in Materials, Snehanshu Pal et al. (Eds), eBook ISBN 978-981-16-3937-1, Series ISSN 2662-3161, Vol. 13, Edition No. 1.
  1. Convener cum coordinator inTEQIP-III sponsored one-week FDP Webinar on AMPCA – 2020 from 8th-12th September, 2020 organized by Dept. of Metallurgical and Materials Engineering at VSSUT Burla.
  2. Master Trainer in TEQIP-III sponsored Workshop on “Hands-on Training on Solar Study Lamp Assembly & Let's Create Non-violence towards Environment” in Association with Gandhi Global Solar Yatra, IIT Bombay (VSSUT, Burla) 2nd October 2019.
  3. Co-convener cum coordinator in TEQIP-III sponsored two-week short term training programme on SPCAM-2019 from 7th – 16th April, 2019 organized by Dept. of Metallurgical and Materials Engineering at VSSUT Burla.
  4. Convener in TEQIP-III sponsored one-week workshop on LSDMB-2019 from 10th – 14th February, 2019 organized by Dept. of Metallurgical and Materials Engineering at VSSUT Burla.
  5. Co-convener cum coordinatorin TEQIP-III sponsored 2-days workshop on Experiments in Non Destructive Testing from 17th – 18th February, 2018 organized by Dept. of Metallurgy and Materials Engineering at VSSUT Burla.
  6. Faculty coordinator in Dravya 2018, annual national symposium organized by Metallurgical and Materials Engineering.
  7. Faculty coordinator in Metaphilia 2017, annual national symposium organized by Metallurgical and Materials Engineering.
NIL
  1. Assistant Warden of Pulaha Hall of Residence, VSSUT, Burla.
  2. Departmental IQAC (NAAC/NBA/Annual Reports) coordinator.
  3. Professor Incharge (PIC) of Mineral Processing laboratory and Metallurgical Thermodynamics & Kinetic laboratory.
  4. Industrial Visit/Expert Talk coordinator.
  5. Department/Central Library coordinator.
  • Invited Talk
    • Dinesh Kumar Mishra -“High Entropy Alloys (HEAs): New Trends of Multi-Component Alloy Systems”(Veer Surendra Sai University Technology, Burla), 10th – 14th February, 2019.
    • Dinesh Kumar Mishra -“High Entropy Alloys: A New Hope in the Modern Scientific Society” (Advanced Engineering Research Foundation (AEMRF), Bhubaneswar), 24th-25th December, 2018.
  • Number of Certification Courses: 02
    • Certified with successive completion of SSA101x: Hands-on training on Solar study lamp assembly from 1st May-31st December 2019 offered by IITBombayX.
    • Certified with successive completion of Non Destructive Test Training – (Level-II)
  • Short-term courses, Workshops & Symposium Attended:
    • QIP Short Term Course on “Advances in Energy and Functional Materials” (IIT BBSR), 14th – 26th June, 2021
    • Short Term Course on “Fracture Mechanics and Its Applications to Laminated Composites” (IIT Guwahati), 01st – 05th March, 2021
    • Faculty Development Programme on “Fundamentals and Advances in Powder Metallurgy” (IIT Indore), 8th – 10th December, 2020
    • Certification courses (completed module) on
    1. Book writing(13th June 2020)
    2. Fundamentals of manuscript preparation(15th June 2020)
    3. Ethics (26th June 2020) by Researcher Academy Module (Elsevier)
    • Certification course on “Focus on Peer Review” byNature Masterclasses (Springer Nature)on 17th June 2020
    • Digital Transformation in Teaching Learning Process (DTITLP) NPIU and IIT Bombay(SWAYAM)from 16th – 30th March 2020.
    • Workshop on “Hands-on Training on Solar Study Lamp Assembly & Let's Create Non-violence towards Environment” in Association with Gandhi Global Solar Yatra, IIT Bombay (VSSUT, Burla),2nd October 2019
    • Short Term Course on “First Course in Computational Fluid Dynamics: Development, Application and Analysis (FCCFD-2018)” (IIT Bombay), 25th – 29th June, 2018
    • Workshop on TEQIP-III Faculty Induction Program, (IIT Kharagpur),24th – 28th May, 2018
    • Short Term Course on “Numerical Techniques for Chemical Process Simulations” (IIT Kharagpur), 20th – 26th November, 2017
    • Workshop on “High Resolution X-Ray and Electron Diffraction” (IIT Kanpur), 01st – 05th February, 2016
    • Workshop on “Advanced Techniques in Materials Characterization” (NIT, Raipur), 22nd – 23rd January, 2016
    • Workshop on “Microstructure Engineering via Heat Treatment” (IIT, Kanpur), 19th – 21st October, 2015
    • Short Term Course on “Aerospace Materials: Processing, Characterization & Applications” (IIT, Roorkee), 01st – 06th June, 2015
  • Lecture Notes Uploaded in the University Site:
    • Metallurgical Thermodynamics & Kinetics (MME-202), [prepared by Dinesh Kumar Mishra, RenuKumariand S. K. BadJena]
    • Non-Ferrous Extractive Metallurgy (MM-15035), [prepared by Dinesh Kumar Mishra, GautamBehera and A. Lava Kumar]
    • Iron Making (MM-15020), [prepared by GautamBehera, SuneetiPurohit and Dinesh Kumar Mishra]
    • Heat Treatment (MM-15-015), [prepared by A. Lava Kumar, Dinesh Kumar Mishra and S. K. BadJena]
    • Mineral Engineering & Fuel Technology (MME - 203), [prepared by GautamBehera, Dinesh Kumar Mishra and A. Lava Kumar]
Present Address : 
Dinesh Kumar Mishra
Assistant Professor
Dept. of Metallurgy & Materials Engineering
V.S.S. University of Technology, Burla
Sambalpur – 768018
Odisha, India
  Permanent Address : 
Dinesh Kumar Mishra
C/O: Dwijabara Mishra
At /P.O.: Kapasi, Via: Chitalo
Pin: 755062
Dist: Jajpur
Odisha